Engine Bay - Vacuum Hosing

[DMCNI]

Hi I am in the process of accumulating the bits to get vin 1780 back on the road.

Currently working on the engine bay and will be replacing all the hosing in this area.

I would be grateful for some information on the diameters of the vacuum hosing I will require.

Thank you in advance.

David

[OverlandMan]

Hi I am in the process of accumulating the bits to get vin 1780 back on the road.

Currently working on the engine bay and will be replacing all the hosing in this area.

I would be grateful for some information on the diameters of the vacuum hosing I will require.

Thank you in advance.

David

It's standard 5/32 ID vacuum hosing if I recall.

[DMCNI]

Thanks for that OverlandMan :)

[gulwng3]

Hervey's kit is pretty simple to install. The silicon hoses attract alot of dust fairly quickly, but work well.

http://www.specialtauto.com/delorean-parts/images/Vacuum-silicone-kit-black.jpg

Andy

[DMCNI]

Cheers Andy :)

I live in Northern Ireland and need it sooner rather than later so going to purchase a length of the hosing and just cut it to size :)

The delivery times from the States to NI are shocking its taking a couple of weeks to get items I have purchased.

[jawn101]

There are a few different diameters required (you can see that right in the pic above) but unfortunately I don't know the measurements.