Nick774
04-06-2014, 02:45 AM
So a new project fell upon me. To build a custom mini-cruiser. From an old rotted deck with gouges and gashes I got for free. I began stripping, cutting, and sanding I finally had a new deck. Two hours to perfectly align the new truck holes (major OCD but worth it). I knew I had to custom paint it so naturally I went the hover board route. After precise tracing and measuring and a little painters tape it was ready. A rich five coats of blood red and opaque white and some new extra bite grip tape. Two appropriately named GULLWING brand long board trucks with matching Mercer polyurethane wheels and top of the line Red Bone bearings. This cruiser can smoothly glide at high speeds and can turn on a dime. Measuring in at 25x7.5 inches and about 3 pounds 4.5 punds This baby can Fly!
May I present, The Rising Sun..
26352
I chose The Rising Sun soley on being my favorite of all the hover boards.
26353
26354263552635626357263582635926360263612636226363 263642635226365
Just to keep the top themed to the car closely the trucks are mounted with Stainless Steel M5 .08 metric bolts and nuts. The DMC logo was measured and cut out and I love it. I hope you guys enjoy this as well.
May I present, The Rising Sun..
26352
I chose The Rising Sun soley on being my favorite of all the hover boards.
26353
26354263552635626357263582635926360263612636226363 263642635226365
Just to keep the top themed to the car closely the trucks are mounted with Stainless Steel M5 .08 metric bolts and nuts. The DMC logo was measured and cut out and I love it. I hope you guys enjoy this as well.