Log in

View Full Version : Some odd/unique things about this car for sale



Stainless
04-25-2014, 12:24 PM
Came across this car for sale. Even though I'm not in the market, I find it amusing to see the differences in all the DeLoreans out there that I come across. Call it a hobby.

I found a few quirky things about this car. Let's make this a game! Name at least one thing unique about this car without repeating other posters.

I'll start it off:

In the outdoor photos, some of the panels, like the driver's side door, appear to have been buffed or something. I think I see swirls.

Jonathan
04-25-2014, 12:28 PM
I noticed the car is hard to see clearly... like the lighting isn't quite right and it's too dark to make out the car itself ;)

eagle-co94
04-25-2014, 12:36 PM
Got a link for us?

Dangermouse
04-25-2014, 01:00 PM
I noticed the car is hard to see clearly... like the lighting isn't quite right and it's too dark to make out the car itself ;)

It's the new Harry Potter (TM) Invisibility Cloak wrap, now available from DMCH

Stainless
04-25-2014, 01:08 PM
Got a link for us?

Crap. I forgot the most important part. Here you go:

http://www.carsforsale.com/used_cars_for_sale/1981_delorean_dmc-12+gullwing_200161275_7

DMCVegas
04-25-2014, 01:46 PM
I can definitely see the swirls. Those also look like someone either repainted the facsias or just outright purchased some new ones with the different paint code for this car. I suppose some moron with a buffer might have done this, but I'm wondering if this was a car that was previously painted and was stripped. The swirl marks would match up with a DA orbital sander. Either when it was prepped for paint or during the removal process.

It's got some things going for it, but it's also an early VIN and it's gonna have some problems. The biggest being that you're gonna need to invest in a bulk pack of ear plugs if you want to drive this car thanks to the wind noise. Look at that passenger door. Early cars like this were built different than later models. The gullwing doors were put on last to match the fenders and quarter panels. So they would never light up with the windshield, or worse yet the underbody. In any case you had horrible gaps that allowed in water and annoying wind noise. Not to mention chunks taken out of the fiberglass. This was later revised at the factory to install the doors FIRST and get them to align to the underbody to ensure a tight seal. THEN the quarters & fenders were installed along with the facisas in order to force the stainless to align to the doors and bumpers.

Some people argue about factory originality, even if it is to the detriment of the car. This is one of those cases. Do you keep it factory original with the doors, the whistling, the leaks, and the laughable appearance? Or do you pull the body panels to realign everything and make it not as the factory built it but as the engineers intended so that you have an enjoyable car that both looks good but also functions as intended?

pezzonovante88
04-25-2014, 01:47 PM
It could just be a crappy wipe-down job.

Stainless
04-25-2014, 01:53 PM
Okay, I'll post another to keep the ball rolling.

The passenger side knee pad appears to have been replaced with what appears to be felt or some other fabric type.

Kane
04-25-2014, 01:53 PM
The knee pads are either in horrible shape or they have been re-covered with what looks like suede. Not quite sure what I'm looking at.

Mark D
04-25-2014, 02:12 PM
It looks like the swirls are mainly on the driver's door. Maybe it had some damage or was replaced?

and looks to me like the windshield was replaced and the roof was not properly supported when the new glass was glued in. The doors kick up at the rear and are to low at the front which seems like a saggy roof issue to me.

And what the heck is that big plastic jug in the engine compartment on the driver's side? Windshield washer reservoir?

Dangermouse
04-25-2014, 02:14 PM
Somebody, anybody, please buy this car!!!!!

It has been for sale, by the same guys, since August 2012. Same pictures, with the same pizza flyers (:angry_whip:) on the windows.

and in keeping with this thread - odd multifit wheels

OverlandMan
04-25-2014, 02:55 PM
I'll go with the most obvious thing: the wheels.

Kerichbe
04-25-2014, 03:00 PM
How about the black overflow tank...not stainless, not plastic..

OverlandMan
04-25-2014, 03:06 PM
How about the black overflow tank...not stainless, not plastic..

My guess is painted stainless... but yea, I saw that too.

Mark D
04-25-2014, 03:18 PM
I could be mistaken but I thought the black painted overflow bottles were made out of aluminum...one of the vendors used to sell them probably 10 years ago...can't remember which.

Jonathan
04-25-2014, 03:44 PM
It's the new Harry Potter (TM) Invisibility Cloak wrap, now available from DMCH

Hehe... that's the ticket! Either that or Q defected over to Houston from MI6 and has taken his Vanish technology with him :)


And what the heck is that big plastic jug in the engine compartment on the driver's side? Windshield washer reservoir?

Gotta be an aftermarket blinker fluid reservoir. The factory ones were notoriously leak prone.

....

It looks to be missing one of these on the driver's side:

http://store.delorean.com/p-10095-seat-belt-trim-cover-exterior.aspx

DMCVegas
04-25-2014, 04:07 PM
...looks to me like the windshield was replaced and the roof was not properly supported when the new glass was glued in. The doors kick up at the rear and are to low at the front which seems like a saggy roof issue to me.

And what the heck is that big plastic jug in the engine compartment on the driver's side? Windshield washer reservoir?

I doubt that it's a saggy roof. That spider cage is really, REALLY strong and was meant to be in order to support the weight of both doors being open, as well as the torsional forces from them opening and closing. It's just misaligned doors, and again probably from the factory given the VIN and other parts like the shifter.

The plastic jug you see is a generic coolant overflow bottle. You can pick them up at any VatoZone.

http://www.wholesalepartsandtools.com/images/products/int-mcr3.jpg

Someone clamped a rubber tube onto the overflow hose of the Surge Tank, and ran it across the side of the intake manifold, and across the rear of the engine where it connects to the back of the tank. Then they ran another hose back across the left side of the engine compartment. And then there is who-knows-what-pressure radiator cap installed onto that tank itself. I can understand when a plastic tank gets replaced, but with this kind of half-assed repair work, it really worries me about what this engine is gone through. You'd really have to pull the oil filler and check for internal damage to that engine.

Dangermouse
04-25-2014, 04:11 PM
I could be mistaken but I thought the black painted overflow bottles were made out of aluminum...one of the vendors used to sell them probably 10 years ago...can't remember which.

I have one of them and I think it is AL too.

NightFlyer
04-25-2014, 04:51 PM
VIN incorrect washer fluid reservoir cap - should be a black metal cap.

pezzonovante88
04-25-2014, 04:55 PM
That jug is pretty ghetto. Also, the suede/alcantara knee pads don't match anything else in the interior. The wheels aren't horrible, but certainly are not preferable. Well, I wish them luck selling it for $29,900.

NightFlyer
04-25-2014, 05:04 PM
It's got some things going for it, but it's also an early VIN and it's gonna have some problems. The biggest being that you're gonna need to invest in a bulk pack of ear plugs if you want to drive this car thanks to the wind noise. Look at that passenger door. Early cars like this were built different than later models. The gullwing doors were put on last to match the fenders and quarter panels. So they would never light up with the windshield, or worse yet the underbody. In any case you had horrible gaps that allowed in water and annoying wind noise. Not to mention chunks taken out of the fiberglass. This was later revised at the factory to install the doors FIRST and get them to align to the underbody to ensure a tight seal. THEN the quarters & fenders were installed along with the facisas in order to force the stainless to align to the doors and bumpers.

Some people argue about factory originality, even if it is to the detriment of the car. This is one of those cases. Do you keep it factory original with the doors, the whistling, the leaks, and the laughable appearance? Or do you pull the body panels to realign everything and make it not as the factory built it but as the engineers intended so that you have an enjoyable car that both looks good but also functions as intended?

My car isn't too far away from this chronologically speaking, but I don't have any issues with wind/water leakage. Panel fit on my car is just as good as any later VIN cars that I've personally ever seen.

Not sure what you mean by "laughable appearance" when you're referencing early VIN'd cars?

Early VINs have many desirable (rare) features, such as the gas flapped hood and dark grey wheels, missing from later produced cars, which command a higher value in the collector car world in general. Maybe that 'laughing' that you describe is how early VIN owners are typically laughing all the way to the bank vs their later VIN owner counterparts...

Dangermouse
04-25-2014, 06:01 PM
I think he is talking about the mis-alignment of the passenger door.

DMCVegas
04-25-2014, 07:30 PM
I think he is talking about the mis-alignment of the passenger door.

That would be correct. It's really hard to show a car off and have such bad panel alignment.

There are definitely a few items on the early VINs that make them more desirable such as the gas flaps, outlined A/C Panel, early shifter style, etc. Some though, such as the paint codes, interior colors, etc. are mostly just matters of either choice of coincidence. But yes, panel alignment is a problem that you'll see on some early VINs such as this one. Some were fixed at the QACs, some probably got through. But it is painfully noticeable on the cars that suffer from it. It doesn't mean that it's a bad car, but it does mean that if someone were to want to good presentable example that it greatly detracts from the car and makes it less desirable. Because you're either going to have to do the work to fix it, or you're a purist that refuses to modify a car and you don't want to get stuck with a poor example.

Fix the doors & body panel alignment, correct the interior, and clean up that engine bay. THEN the car will become much more worthy of it's asking price.

Jonathan
04-25-2014, 08:51 PM
There may be more to it than this, but those doors look like they aren't closed all the way. When the back edge is up like that, it can mean the rear latch hasn't reached the second click spot. Can be related to the striker pins not quite in the right spot or simply the door wasn't closed with enough oomph. I had a very similar looking issue with my car early on in ownership until someone pointed it out to me. With some adjustment and a bit more force to close the door than purely fingertips, it's aligned the way it should be.

berickson926
06-25-2014, 03:38 AM
Somebody, anybody, please buy this car!!!!!

It has been for sale, by the same guys, since August 2012. Same pictures, with the same pizza flyers (:angry_whip:) on the windows.

and in keeping with this thread - odd multifit wheels

I got a good laugh when I discovered this thread a while back. I thought I should give an update (and my first post) by saying... I just bought it!

The original links were dead by the time I found this, but by the descriptions and discussions I'm fairly certain it is this:

http://www.hemmings.com/classifieds/dealer/delorean/dmc_12/1383271.html

The kneepads & overflow tank, definitely weird. I plan on getting the stock wheels back on eventually too.

The doors in those pictures must have been left ajar as it wasn't really an issue when I inspected the car in person.

Door swirls, also must have been just wiped down before they took those photos. I didn't see anything wrong with the grain and it isn't painted.

Dangermouse
06-25-2014, 09:35 AM
Thank you, thank you :) This is 1325?

It's a nice looking car in general.

Where are you located? You will find all the help you need here. Congrats

berickson926
06-25-2014, 07:51 PM
Thank you, thank you :) This is 1325?

It's a nice looking car in general.

Where are you located? You will find all the help you need here. Congrats

Thanks! It is 1325, and located in Southern California.

Silverbullet
06-25-2014, 09:04 PM
Ah.... Welcome.... How far from Brea CA?

Craig