View Full Version : Ceramic Coating engine parts?
sdg3205
04-27-2014, 01:18 PM
Has anybody tried to ceramic coat items like valves covers, timing covers, intake horns etc?
It looks very similar to chrome, but is typically used on exhaust items for it's high heat durability and heat dissipation.
Delorean Industries
04-27-2014, 04:02 PM
We did this on vin 153x (can't remember the end). The ceramic coating holds up well appearance wise. Keep in mind that the coating eliminates the cast components ability to breathe and dissipate heat.
David T
04-28-2014, 10:45 AM
We did this on vin 153x (can't remember the end). The ceramic coating holds up well appearance wise. Keep in mind that the coating eliminates the cast components ability to breathe and dissipate heat.
It is usually only done to exhaust parts like the exhaust manifolds. It can take a LOT of heat but does not prevent the cast iron from rusting. Ceramic is also VERY sensitive to damage from anything tapping it or hitting it. Since you can't see the exhaust manifolds all that much on a Delorean, there are other, cheaper things you can do. There are plenty of high heat spray paints you can use.
gulwng3
04-28-2014, 11:51 AM
Why not powder coat these parts?
Andy
sdg3205
04-28-2014, 12:03 PM
To answer both above questions:
Dave t - I've done spray paints, so far my fav
Andy - did a car with powder coating, I liked it too.
The ceramic coating just had such a nice chrome like shine to it. There is a local company here that claims their coatings help cool engines. Just got me thinking. Chroming is way to expensive and painting is prone to chipping. Powder coating had a few drawbacks too because the coating is so thick.
David T
04-28-2014, 02:31 PM
To answer both above questions:
Dave t - I've done spray paints, so far my fav
Andy - did a car with powder coating, I liked it too.
The ceramic coating just had such a nice chrome like shine to it. There is a local company here that claims their coatings help cool engines. Just got me thinking. Chroming is way to expensive and painting is prone to chipping. Powder coating had a few drawbacks too because the coating is so thick.
The old Jaguar XKE's had ceramic coated exhaust manifolds and it looked very nice but it was right in front of your face when you looked at the motor. It's actually porcelain which is just glass powder melted onto the cast iron (just like a bath tub). It does help keep the temperatures lower in the engine bay. In fact, it is a great way to keep the heat in especially if you have a lot of exhaust plumbing going to a turbocharger. You want the exhaust to stay just as hot as it can so you can get all of that energy into the turbo before dumping it. Check out Eastwood.com for their coatings for exhaust parts. They work pretty well and keep things looking neat and not rusty. A LOT cheaper than ceramic or powder.
steve
04-28-2014, 07:34 PM
http://swaintech.com/race-coatings/race-coating-descriptions/white-lightning-exhaust-coatings/
This is what we use on the Lotus manifolds, Turbos and down pipes.8)
Steve
Powered by vBulletin® Version 4.2.5 Copyright © 2026 vBulletin Solutions Inc. All rights reserved.