81dmc
Senior Member

Just in SWFL, I know of 3 other owners besides me and you. So that's about 5 in SWFL alone, and there's another 5 or so in SEFL. There's a lot...

I also will eventually try the entire NB Miata knuckle and spindle. Will update here when I have results.

It took awhile but I finally got the bushing spacers from SPC. So I inserted SPC spacer from inside to out on bushings. Rear mount has no other...

I mean he told me they plan to make them anyways, but with more interest, the more likely it will become a thing.

Wasn't feasible as transmission required frame mods, and the only welder I knew to trust for such a task passed away. With that said, I have...

No idea about Josh with his recent job change, but the DMCH SEMA car had a nice set of 17/18 OE look wheels. I did talk to James and if they get...

I'm interested in seat design, steering column, hvac setup, and rims from the DMCH SEMA car. I know the power steering column and steering wheel...

Kind of. They are 1/2" longer and pretty thick, and it's why 97001 ball joints are required. And note the 97001 is a smaller diameter stud...

Still test fitting etc. But so far, RH side is together. Clearance between forward part of control arm and rim is very close, but that could be...

The craziest thing is the cluster seems like a simple design. They just put it on screen like a picture. Everything I've seen tells me it's non...

That plate above upper shock bolt? 800 series vin so yeah very early.

Got some parts today to do a good test fit, and it clears frame. I'm currently waiting on steering knuckles to get it all together.

Did I mention you? What is problem here? Edit: And I first messaged you and figured you were done as I got no response. So I decided to...

This has been sold, please close!

Parts remaining: 3- Used lambda ECU with pigtail $49 6- Used automatic throttle spool $90 7- Used automatic flex plate in good shape...