Hate to say it but if the front is off, so is the back. The possible fix might be as easy as loosening the frame and seeing if you can slide it back...
Considering other vehicles have the body placed better over the wheels, what it should have been like from the factory is our frames mated better to...
Not so simple: you'll still have the sway bar pulling the LCAs forward to the original position which will destroy the bushings. You'd have to either...
I guess I am unable to compare, my car is lowered (stainless LCAs, Grady Gen1 lowering springs, original shocks). The closest mine gets is about 1/2"...
Looks normal to me, here is mine and my suspension has been overhauled, along with trying two different sway bars. Frame is straight but a very early...
Thanks fellas. I cut the plunger down about half way and put the cap on it so it does not touch the door and push in, then spliced the wire in to the...
At this point I'm just looking for the small stuff that is wrong with my car to fix. Mine was missing the LH bracket 105283 that goes from where the...
I'm no businessman but it has appeared to me for quite some time now that they missed the opportunity to do all that. DPI realized what we needed and...
I had to initiate a search for missing mail but the parts finally arrived over the weekend. I changed both motor/regulator assemblies, took about 45...
I have EFI as well as the modern fuel pump. The only time I smelled fuel at idle was when one of the accumulator hoses started to leak. I would love...
I don't know why the pictures came out so small, I'll try again below. I'm pretty sure the window is on track, it looks the same on the driver's side...
Thanks fellas. No worries about the sharp edges, I put door edge guard around the access holes in the doors years ago and my upper panels are held on...