1982 Frame Off Restoration

I found that I had missed attaching the ground wire on the alternator so I hooked that up.
https://uploads.tapatalk-cdn.com/202...deb825cc3f.jpg
Tam was busy working in cleaning and disinfecting the interior.
https://uploads.tapatalk-cdn.com/202...2dffaac3a2.jpg
Next I ran the positive cables to the starter. What a horrible pain in the butt!! For an frustrating hour I tried to get the battery cable onto the starter. I found a #4 cable in my shop and was going to use it to make my own battery cable. I asked Tam to help me one last time. We managed to get it finally. Getting these wires on to starter was torturous. I need a car lift. https://uploads.tapatalk-cdn.com/202...305b7d780d.jpg

Sent from my SM-F946U1 using Tapatalk

I hooked up the starter control wire and routed the wire.
https://uploads.tapatalk-cdn.com/202...da8cfb1e3c.jpg
Tam had removed most of the carpets and cleaned them.
https://uploads.tapatalk-cdn.com/202...8aae80378f.jpg

https://uploads.tapatalk-cdn.com/202...c0bdb9f97e.jpg

She had removed the amplifier a previous owner had installed.
https://uploads.tapatalk-cdn.com/202...8de3339417.jpg
It turns out the wires at the amp were hacked off by someone.

https://uploads.tapatalk-cdn.com/202...d04f620f4e.jpg

Last thing we did was install some sound deadener on the back wall.
https://uploads.tapatalk-cdn.com/202...2fc50ca09d.jpg

Sent from my SM-F946U1 using Tapatalk

When i installed sound deadener on the firewall I also removed the 40+ year old horizontal padding that had a terrible smell. I installed more self-adhesive sound deadener and plan to install a layer of Luxury Liner on top of that - the the carpet.

Quote:

---

Originally Posted by Timeless

When i installed sound deadener on the firewall I also removed the 40+ year old horizontal padding that had a terrible smell. I installed more self-adhesive sound deadener and plan to install a layer of Luxury Liner on top of that - the the carpet.

---

Yeah this stuff smells awful and the black rubber is all sticky

Sent from my SM-F946U1 using Tapatalk

Some parts Josh shipped for free showed up yesterday. I thought this was really great of him. Now before you go and think he's going to send stuff to you for free we have spent a LOT of money with D-Ind over the past 2 years.
https://uploads.tapatalk-cdn.com/202...81d958b778.jpg
This is the new fitting for the inlet of the fuel filter that Josh sent. It's a very unique fitting. Not sure where he managed to find something like this.
https://uploads.tapatalk-cdn.com/202...37fe7f63ef.jpg

We worked on the car for around four hours.

I removed the leaking fitting. The oring was toast.
Sorry no picture.

The pipe ended up being too long with the new fitting.
https://uploads.tapatalk-cdn.com/202...a940dde358.jpg

Meanwhile Tam continued removing carpet and cleaning it even though I told her not to do that part yet.[emoji849] https://uploads.tapatalk-cdn.com/202...441ff8cd77.jpg


Sent from my SM-F946U1 using Tapatalk

I marked and cut back the pipe. I was really hoping that I wasn't making a mistake here since the pipes run between the body and the frame. After the first cut the pipe was still a bit too long, even after loosening the mounting bracket, so I cut the pipe again. A slow process for sure.
https://uploads.tapatalk-cdn.com/202...10319e0cf6.jpg
Josh advised me to dress up the end of the pipe after so I used a dremel tool with a sanding drum to tidy up the end.
https://uploads.tapatalk-cdn.com/202...f757ad737e.jpg
I put the fitting together and tightened it down. I sent power to the fuel pump. The fitting leaked like a sieve.
https://uploads.tapatalk-cdn.com/202...17e9a9c491.jpg

Sent from my SM-F946U1 using Tapatalk

I tightened the fitting down as much as I dared to and it seemed to stop leaking but the banjo fitting on top was weeping. So I took it apart. The banjo bolt was old. I had some new ones but they were shorter so I didn't dare to swap it out.

I did replace the copper sealing washers though and snugged the bolt down really good. I put power to the pump again. The fuel filter seemed to be okay now. Next up the fuel accumulator leak.https://uploads.tapatalk-cdn.com/202...bae260c408.jpg

Sent from my SM-F946U1 using Tapatalk

I didn't get pictures but this was the culprit. What a pain!! There is no room in there for wrenches, you can't see what you are doing,....it's miserable.
I tried tightening it several times but no matter what it leaked.
I am wondering if maybe the nut I bought is too tall and bottoming out before the fitting fully seats.https://uploads.tapatalk-cdn.com/202...854dfd44dc.jpghttps://uploads.tapatalk-cdn.com/202...5080c175a7.jpghttps://uploads.tapatalk-cdn.com/202...441152978e.jpg

Sent from my SM-F946U1 using Tapatalk

The last thing we did is install the "pipe of pain" and the idle air control valve. Wow...another pain in the butt job. Having the new seal installed made installing the pipe nearly impossible. I took everything in me to manage to get the pipe pushed in far enough.
It kills me how there is so much crap shoved into the left side of this engine (ac pump, IAC, spark distributor, cold start valve, WUR, etc) but hardly ANYTHING on the right side!https://uploads.tapatalk-cdn.com/202...3dd4954be4.jpg

Sent from my SM-F946U1 using Tapatalk

Quote:

---

Originally Posted by SupercoolBill

I tightened the fitting down as much as I dared to and it seemed to stop leaking but the banjo fitting on top was weeping. So I took it apart. The banjo bolt was old. I had some new ones but they were shorter so I didn't dare to swap it out.

I did replace the copper sealing washers though and snugged the bolt down really good. I put power to the pump again. The fuel filter seemed to be okay now. Next up the fuel accumulator leak.https://uploads.tapatalk-cdn.com/202...bae260c408.jpg

Sent from my SM-F946U1 using Tapatalk

---

Not sure if you had asked about this in our private technical thread, but we supply the shorter banjo for use with our line kit. The factory end at the fuel filter is bulky on the plastic line. You are bottoming out the longer M12. Just swap out for the one on the right and you will be good to go.