1982 Frame Off Restoration

Quote:

---

Originally Posted by SupercoolBill

The last thing we did is install the "pipe of pain" and the idle air control valve. Wow...another pain in the butt job. Having the new seal installed made installing the pipe nearly impossible. I took everything in me to manage to get the pipe pushed in far enough.
It kills me how there is so much crap shoved into the left side of this engine (ac pump, IAC, spark distributor, cold start valve, WUR, etc) but hardly ANYTHING on the right side!https://uploads.tapatalk-cdn.com/202...3dd4954be4.jpg

Sent from my SM-F946U1 using Tapatalk

---

Lotus designed it like that for optimum weight distribution :rofl:

Quote:

---

Originally Posted by Delorean Industries

Not sure if you had asked about this in our private technical thread, but we supply the shorter banjo for use with our line kit. The factory end at the fuel filter is bulky on the plastic line. You are bottoming out the longer M12. Just swap out for the one on the right and you will be good to go.

---

Yeah you answered this for me. I'm just writing history at this point. I'm behind on my log entries. [emoji1]

Sent from my SM-F946U1 using Tapatalk

Tam's leather reconditioning kit showed up so she is all excited. https://uploads.tapatalk-cdn.com/202...252bff3239.jpg
It looks like the gray is a pretty good match.
https://uploads.tapatalk-cdn.com/202...3cb0dcc90f.jpg

Sent from my SM-F946U1 using Tapatalk

No work on the car tonight because I visit inmates in jail on Friday nights. This is something I thoroughly enjoy. I would encourage anyone to volunteer to do this.

We are in RI for a race this weekend so probably no work getting done on the car until maybe Monday.

Sent from my SM-F946U1 using Tapatalk

Quote:

---

Originally Posted by SupercoolBill

No work on the car tonight because I visit inmates in jail on Friday nights. This is something I thoroughly enjoy. I would encourage anyone to volunteer to do this.

We are in RI for a race this weekend so probably no work getting done on the car until maybe Monday.

Sent from my SM-F946U1 using Tapatalk

---

Visit them and do what? Serious question.

Quote:

---

Originally Posted by Helirich

Visit them and do what? Serious question.

---

It's through my church. So supposed to be a Bible study but it turns into whatever it is supposed to be. I bring them books, journals, etc. They are really happy just to talk to someone from the outside. If they want to make a change in thier life we try to help them with that.

Sent from my SM-F946U1 using Tapatalk

Quote:

---

Originally Posted by SupercoolBill

It's through my church. So supposed to be a Bible study but it turns into whatever it is supposed to be. I bring them books, journals, etc. They are really happy just to talk to someone from the outside. If they want to make a change in thier life we try to help them with that.

Sent from my SM-F946U1 using Tapatalk

---

Interesting. Very good of you to do it.

We are back from RI. My wife and her friend ran a 10 mile race. We visited the Newport car museum on the way home. Quite a collection. Sadly no Deloreans though. Here's a few of the pictures I took.
https://uploads.tapatalk-cdn.com/202...b01bb59a26.jpghttps://uploads.tapatalk-cdn.com/202...6619135d8b.jpghttps://uploads.tapatalk-cdn.com/202...a6ee6b0240.jpghttps://uploads.tapatalk-cdn.com/202...959fc35eae.jpghttps://uploads.tapatalk-cdn.com/202...dc1ff43f31.jpghttps://uploads.tapatalk-cdn.com/202...65e830a9d0.jpg

Sent from my SM-F946U1 using Tapatalk

We worked on the car tonight from 5-8P. Tam worked on one of the seats.
https://uploads.tapatalk-cdn.com/202...8336e50009.jpg
https://uploads.tapatalk-cdn.com/202...f90dc85de0.jpg

I scoped out the situation with my O2 sensor and the factory wire. The wire pokes out through in a bad location. The O2 sensor wire didn't quite reach.
https://uploads.tapatalk-cdn.com/202...d2ce42b892.jpg
Josh from D-Ind said that I can just extend the O2 sensor wire. I decided to look in the car. There was some extra wire in the car so I moved more wiring out through the tub.
https://uploads.tapatalk-cdn.com/202...afc1e684a1.jpg
https://uploads.tapatalk-cdn.com/202...b545a30feb.jpg
https://uploads.tapatalk-cdn.com/202...b10ca8acbd.jpg
I really don't like where this wire comes out through the tub. I may drill a new hole at some pont.


Sent from my SM-F946U1 using Tapatalk

Next I jumped back into the fuel system. I ended up just completely removing the accumulator. Horrible job by the way.
https://uploads.tapatalk-cdn.com/202...d3a2655646.jpg
The fittings on the end looked perfectly fine.
https://uploads.tapatalk-cdn.com/202...6f7a8ad96a.jpg
I put some anti-sieze on the threads and tightened the fitting down as tight as i dared to.
https://uploads.tapatalk-cdn.com/202...e3ee2a9134.jpg
https://uploads.tapatalk-cdn.com/202...ecc763d88d.jpg
https://uploads.tapatalk-cdn.com/202...b95f1881f0.jpg

Sent from my SM-F946U1 using Tapatalk