1982 Frame Off Restoration

Quote:

---

Originally Posted by Josh

Some may disagree, but it is not worth the effort/risk of doing a roof box until you have through rust (rust holes in any of the sections). Otherwise, just rivet down the rear section, spray some sort of rust prevention into the center section, and check back in a decade.

---

Thanks. I think it has been riveted by someone already unless it has rivets from the factory.

Sent from my SM-S928U using Tapatalk

I took a break from work this morning and went on DMCH and put stuff in my cart. Unfortunately several things I wanted to order (Roof interior panels, seat covers, carpet kit, floor mats, etc.) were not in stock. I contacted James Espey and he told me what the situation was on each item and expected lead times for those that he knew. I really appreciated this.




Sent from my SM-S928U using Tapatalk

We have no reoccurring plans on Monday nights so usually plan to work on the car on Monday nights but Mondays at work also take a lot out of us. So after work we decided to not work on it. I did however look through the parts for the car to see what we have for usable seat belt parts vs. what we need. I went on DMCH's site and printed out the pages for the seat belts.
https://uploads.tapatalk-cdn.com/202...66bad2260c.jpg
I don't know why this was so dang confusing but it was. I ended up writing the part numbers on the exploded diagram then writing down what I do and don't have and condition it is in.
https://uploads.tapatalk-cdn.com/202...7724d1dfad.jpg

Sent from my SM-S928U using Tapatalk

Quote:

---

Originally Posted by JETS 81 DMC

Here is a tread with some options for re-graining tools that are less expensive. Also some warnings on the use.

https://dmctalk.org/showthread.php?1...m%20them%20yet.

Some info on re-graining and tools in this link:
https://www.noroads.com/delorean/328...turize%20metal.

You, Tam and the pups have been making some great progress. :cheers1:

Thanks again for all the time you take for your very detailed posts too. [emoji106]

---

Thanks
https://uploads.tapatalk-cdn.com/202...f2a62e5f90.jpg

Sent from my SM-S928U using Tapatalk

Okay guys (and girls maybe?) You be the judge.
From the access hole forward looks pretty good.
https://uploads.tapatalk-cdn.com/202...3407b9687b.jpghttps://uploads.tapatalk-cdn.com/202...354a1837d0.jpghttps://uploads.tapatalk-cdn.com/202...081c799976.jpghttps://uploads.tapatalk-cdn.com/202...dc0d88728f.jpghttps://uploads.tapatalk-cdn.com/202...3037ce1efa.jpghttps://uploads.tapatalk-cdn.com/202...3824c6f841.jpg

Sent from my SM-S928U using Tapatalk

Here where it gets dicey. This is from the access hole rearward. Night and day difference-
https://uploads.tapatalk-cdn.com/202...09dc1c4468.jpghttps://uploads.tapatalk-cdn.com/202...75932575af.jpghttps://uploads.tapatalk-cdn.com/202...10c0eaac50.jpghttps://uploads.tapatalk-cdn.com/202...a6ec5f900c.jpghttps://uploads.tapatalk-cdn.com/202...ad7868b0e5.jpghttps://uploads.tapatalk-cdn.com/202...fc65029448.jpg

Sent from my SM-S928U using Tapatalk

The rust tan line is crazy
https://uploads.tapatalk-cdn.com/202...bcee1c898c.jpg

This looked like a hole at first but I think maybe it just looks that way
https://uploads.tapatalk-cdn.com/202...6b1052dca5.jpg
https://uploads.tapatalk-cdn.com/202...466d140f59.jpg

Look at that pile of rust flakes!
https://uploads.tapatalk-cdn.com/202...c549f1036d.jpg

I do have a full can of cavity wax.
https://uploads.tapatalk-cdn.com/202...2247751086.jpg

So what do you think? Can I just clean it out, coat it with cavity wax, and put off doing the roof box for a few years?

Sent from my SM-S928U using Tapatalk

I have read in a Corvette forum that Bilt Hamber Dynax-ML product similar to 3M Cavity Wax will penetrate existing rust and protect from more occurring better than the 3M product.

Corvettes are known for the "bird cage" area for a lot of rust. Bird cage is part of the frame structure around the cockpit of the car.

Just thought I would pass this info on. I have no firsthand experience with either product.

Others on the forum with roof box structure experience like on yours should give you some advice.

Good pictures you posted of it.

Quote:

---

Originally Posted by SupercoolBill

So what do you think? Can I just clean it out, coat it with cavity wax, and put off doing the roof box for a few years?

---

I say yes.
My roof box was WAYYYYYYY worse and still working fine. I finally replaced the center section when the sides started to rust thru.

Attachment 71915Attachment 71916Attachment 71913Attachment 71914Attachment 71912

Quote:

---

Originally Posted by SupercoolBill

So what do you think? Can I just clean it out, coat it with cavity wax, and put off doing the roof box for a few years?

---

I vacuumed mine out using a variety of homemade vacuum attachment made from garden hoses, etc. I cleaned it as best I could this way, got a wire brush in where I could, etc. Then I used an Eastwood rust encapsulator paint with a long extender hose, and when that was dry in a few days, I used an Eastwood Waxoyl type of product also with a large extender hose and sprayed that all over the place in there as well. I think that bought a ton of time and will work for you as well.

https://www.eastwood.com/eastwood-he...ch-nozzle.html
https://www.eastwood.com/eastwood-bl...over-rust.html
https://www.eastwood.com/eastwood-he...-in-black.html