Originally Posted by
Spittybug
While I am diligent in maintaining the electrical integrity of my car, this one eluded me... I had checked all of my ground connections and was convinced I was in good shape. I decided today, since it was a RARE low humidity, only 92 degree day in Houston, to solder all of my connectors to their cables using my handy dandy propane torch and spool of solder. Well, lo and behold, when I got to the MAIN ground; battery to frame, the bolt was in good connection, but the connector on the end of the wire was spinning on the wire! This is located right next to the passenger side TAB. CHECK THIS PEOPLE!! With time, these funny 90 degree clamped on connectors are starting to come loose from the wires. In the attached pics you see what I'm referring to, but make sure you check ALL such wires. I have pulled it out, cut an inch off the end, dremmeled the connector, reattached it to the wire and soldered the connection. BAM!