Today I finished tidying up the electrical compartment behind the passenger seat. I added a relay for the fuel pump and choke heater. Since the Lambda relay is a dual-make SPST, I used it in that spot. Just like stock, it's Fuse #7. :)
I confirmed that everything works, but it's pretty messy-looking back there at the moment. Nonetheless, I decided to tackle the area behind the radio bracket next. Most of the harness tape has also fallen off in that area. I applied my HVAC mod, but noticed some wires coming out of the back of the hazard switch receptacle. Looks like that's my next job. I'll have to take the radio bracket out -- again! -- but I'm getting good at putting the boots over the air box now, I've done it so many times. :)
I worked a tiny bit on the fuel system, but didn't get very far before it was time to call it a night, so basically I didn't get much done apart from test-fitting a few bits.
Fortunately, the weekend is almost here. :)
