What have you done to your DeLorean today?

Quote:

---

Originally Posted by Rich

Since we now see that those were indeed DMCMW Eibachs you may be interested in knowing that the Eibach front-rear spring setuplooks like this in side view before and after:
Attachment 27012 Attachment 27013

---

Wow! Look at how much the Eibachs helped the trees get more levees.:shocked:

The look of the car is much better when it is lowered.
I did cut my spring many years ago, but I bought a set of Eibach spring from DMCH and Spax shock from the UK.
Just need to find some free time to install them :biggrin:

Quote:

---

Originally Posted by Rich

Since we now see that those were indeed DMCMW Eibachs you may be interested in knowing that the Eibach front-rear spring setuplooks like this in side view before and after:

Attachment 27012 Attachment 27013

In this case the new (non-Eibach) rear shocks have adjustable spring perches with that adjustment set so as to create same ride height of frame crossmember front-rear.

---

Wow, even the rear came down a bit. I like it and am looking forward to mine. :wiggle:

-Replaced the steering column bushing.

-Diagnosed a charging issue....(thanks for the help Dave and Dave.)

Recovered headliner and noticed on the front piece I only have screws where the rear bracket is supposed to be. So only one bracket holds up the main headliner. Is this normal?

Sent from my XT1060 using Tapatalk

Quote:

---

Originally Posted by gamerguy51

Recovered headliner and noticed on the front piece I only have screws where the rear bracket is supposed to be. So only one bracket holds up the main headliner. Is this normal?

---

http://store.delorean.com/c-397-8-7-...roof-trim.aspx

Yes.

Quote:

---

Originally Posted by vps3922

Wow, even the rear came down a bit. I like it and am looking forward to mine. :wiggle:

---

The rear ride height will be adjustable over a wide range if you update the rear shocks to units with adjustable/threaded support. Rear ride height is not solely due to the choice of rear springs. I don't know how the rear height works out with Eibachs around Girling OE's so don't count on that photo for predicting it.

This was actually on Friday, but still. Went out for a drive through the country roads behind my house - and I mean proper country. Farmland and twisties through the English Hills.

Ran across this sign, randomly staked into the ground at a street sign. No context and no idea why. Unfortunately there was no shoulder there and no safe way to get a photo with the car and the sign both.

http://dmctalk.org/attachment.php?at...6&d=1399787790

Pretty random.

Spend a good 3 hrs of intimate windshield time with my car tonight, Sadly not by driving. About two weeks back I had some 70% (nearly clear) UV and IR shielding Ceramic window tint installed on my windshield, Tint always takes about four or five days to fully dry and let the bubbles go away. Well two weeks later the film was not clearing up, I think there was dust trapped under the film So It had to come off. Removing the film wasnt hard but then I had to use soapy water and a bunch of razor blades and scrape off all the remaining glue, What a chore. That was an hour and a half, Next I cleaned it again and went over both sides with a Glass Clay Bar, then clean again and finally a full wax up. At least I didnt pay to have it installed...


Those little freakles all over the glass

Attachment 27097
Attachment 27098
Attachment 27099

Aw man, that sucks. Did the tint at least help with the heat?