i have no idea if they are different. you may want to ask Ed at DMC Europe. I doubt that he makes his own, really, so probably they are the same.
Printable View
i have no idea if they are different. you may want to ask Ed at DMC Europe. I doubt that he makes his own, really, so probably they are the same.
I saw this video a few months back on Jay Leno's Garage web series. Does anyone have experience with Archoil? These products look amazing.
http://youtu.be/h3ir3bg0ESU
Took a lil time and re-painted the coolant bottle brackets. I utilized Rustoleum High Heat Black Paint with a Matte (sp?) finish. Came out pretty good I think!
Utilized new hardware as well. Bolts are M6 x 1.00 EXCEPT for the top bolt that holds the bracket closest to the tail lights. That one is an odd bird that I have to find tomorrow.
http://i1246.photobucket.com/albums/...27514017_o.jpg
http://i1246.photobucket.com/albums/...15823422_o.jpg
Who said you can't do Costco with a Delorean?
That's not good. That should definitely be a typical M6. Hope your rivet nut isn't messed up. Might want to get a tap to chase those threads out. If it really doesn't work, there is a chance someone replaced the rivet nut in the past but couldn't get metric ones, so they used a 1/4-20.Quote:
Originally Posted by DeLorean03
As usual, you were right my man. I got some thin pipe cleaner bristle brushes and was able to clean the threads. The M6 x 1.00 bolt went in no problem! Also, got a new hose from HD like you suggested. Outer diameter of 1/2" with an inner diameter of 3/8" (man, I love my vernier calipers). Here's the finished product:Quote:
Originally Posted by Nicholas R
http://i1246.photobucket.com/albums/...3/DSCF6029.jpg
Looks good man!:thumbup:Quote:
Originally Posted by DeLorean03
I love it. Especially, the look on the sacker's face when he expects to see an engine there.Quote:
Originally Posted by mburshtain
Quote:
Originally Posted by mburshtain
Paper or plastic?Quote:
Originally Posted by Henrik
TRUNK!!!
Awesome!! :)
A couple years back I replaced my cigar lighter with a US sized cigarette lighter (the gowesty one). It is a near perfect match to the OEM lighter design, complete with illuminated ring. The only problem is that the lighter itself has a cigarette icon printed on it. I tried removing it with all kinds of solvents, but none worked. So, I bought some black paint intended for plastics, and painted over it. It finally looks like the OEM one!
OEM on left, replacement on right:
Attachment 27636
View of icon that had to go:
Attachment 27637