What have you done to your DeLorean today?

Quote:

---

Originally Posted by alexwolf1216

Love it!!!! Care to post some instructions?

---

http://dmctalk.org/showthread.php?15...371#post156371

Quote:

---

Originally Posted by sdg3205

http://dmctalk.org/showthread.php?15...371#post156371

---

Ha! Thanks

Quote:

---

Originally Posted by SIMid

Accidentally drove over a concrete block at a local car gathering. :sad30::sad30:

Took some of the epoxy off the rear of the frame. I heard POR15 is the way to go? Anyone used this stuff before?

I'm thinking of touching it up, not to strip and repaint the whole rear of the frame.

I know the colour wont match, but I don't want the rust to blow out on it.

---

Simon,
I had a sneaky brake fluid leak that I hadn't discovered. I stripped the frame wherever the paint had been dissolved, ground the frame down to the metal and painted 2-3 layers of Gray POR-15 Rust Preventive, pn 45208 for the pint. This stuff dries rock-hard, like glass - awesome. I highly recommend it! BTW, the gray color is very close to our frame gray.

Henrik

Quote:

---

Originally Posted by Henrik

Simon,
I had a sneaky brake fluid leak that I hadn't discovered. I stripped the frame wherever the paint had been dissolved, ground the frame down to the metal and painted 2-3 layers of Gray POR-15 Rust Preventive, pn 45208 for the pint. This stuff dries rock-hard, like glass - awesome. I highly recommend it! BTW, the gray color is very close to our frame gray.

Henrik

---

Hi Henrik,

I tried to get some POR15, but it's a rare product here and the supplier that I could find only had "Black". When I requested if I could have "Gray", it seemed to be a hassle for him to order it, plus he only had 500ml which I only need less than half to touch up.

But I managed to find KBS Coating which is pretty much the same product. Comes in gray as well. There supplier was really helpful.

I only need to touch up a few spots. I'm guessing no harm painting large areas (on top of the epoxy) when it's thoroughly cleaned?

Quote:

---

Originally Posted by sdg3205

foot well lighting!!!

---

NICE!!

I'm definitely going to do this someday. Jeremiah showed me his setup at DCS and I really liked it. :rock_on:

Quote:

---

Originally Posted by SIMid

When I requested if I could have "Gray", it seemed to be a hassle for him to order it,

---

Should have asked for grey ;)

Quote:

---

Originally Posted by SIMid

But I managed to find KBS Coating which is pretty much the same product. Comes in gray as well.

---

That's what I use - great stuff and comes with a complete kit of all the treatments.

Quote:

---

Originally Posted by Tillsy

Should have asked for grey ;).

---

LOL! I changed the spelling as I didn't want to cause a debate on here. :p

Quote:

---

Originally Posted by Tillsy

That's what I use - great stuff and comes with a complete kit of all the treatments.

---

I got the Sampler kit which comes with the AquaClean, probably what you got as well. :) So it should not be an issue at all when I prep and paint.

How did the colour-color match up with KBS Grey-Gray with the frame Tillsy?

Quote:

---

Originally Posted by SIMid

How did the colour-color match up with KBS Grey-Gray with the frame Tillsy?

---

It looks exactly like you'd imagine the frame would have brand new. So colour wise a dead on match, but condition wise it's a bad match - the old is very dull, filthy, and matte whereas the new is bright, shiny, and sexy :)

Thought I had a picture uploaded here of the frame extension work I did recently, can't find it though. Here's a shot of the brake fluid damage I fixed inside the fuel tank area a couple of years ago...
http://dmctalk.org/attachment.php?attachmentid=11610

Removed headlight assemblies and front fascia.

Painted headlight assemblies & replaced adjusters, removed eyebrows.

The headlight area had a few mouse-nests when I bought it, I'm now going to clean out the entire area and hopefully remove the smell that's been making it into the cabin. Also hoping to resolve the gap where the fascia meets the fender.