http://uploads.tapatalk-cdn.com/2016...e626b37c57.jpg
Here is the part number for a Delphi unit
Sent from my SM-N920P using Tapatalk
Printable View
http://uploads.tapatalk-cdn.com/2016...e626b37c57.jpg
Here is the part number for a Delphi unit
Sent from my SM-N920P using Tapatalk
took it on its first full length drive (to cars and coffee) after replacing fuel lines, vac lines, cleaning injectors, fuel filter replace, and a few other odds and ends. slight high (1k rpm) idle issue but it appears thats because the throttle lever isn't returning 100%. lightly touching it pressed a bit more on the idle microswitch and returns idle to normal. should be an easy fix by either adjusting the return spring or messing with the length of the throttle rod by 1 turn. other than that, the car runs great!
I've put somewhere around 600 miles on the car so far this season. And with a working speedo too no less!
Got my A/C blowing cold again thanks to a couple cans of RedTek12a. So, at least for the time being, I'm driving around in a bar frig instead of an easy bake oven!
Here's a pic from one of the cruise nights I went to this week. It's about 35 miles away, so it makes for a great drive there and back.
Attachment 44033
Would you post some details & pics please?Quote:
Originally Posted by Tillsy
Thanks!
Quote:
Originally Posted by Tillsy
last year, when replacing my clutch master cyl, I ordered a replacement softline from PJ Grady (as well as his remanned master cyls). he uses Aeroquip AQP hoses. 0 sweating what-so-ever with that. great product.
Took mine on a 2200km trip to Ontario and back to meet other Canadian owners. Performed like a champ! Mine is 3rd from the right. First time at a DeLorean get together and I loves it. Attachment 44060
I failed to weld a nut on the broken stud (the farthest forward one on the passenger side). Then I found that the same one on the other side was also broken (can see rust on the end so I didn't break it while removing). And I noticed that the oil pressure switch I installed a few days ago is leaking around the connector like the last one. And on and on and on...
Bummer...yeah, some days it feels like the fight will never end. Time for a tech day at your place?Quote:
Originally Posted by nkemp
No more gray wheels, mine's now sporting freshly powder coated Bengal Silver rims. In addition to that she now has new DPNW radiator fans, new axle boots, new lip seal, and sway bar bushings.Attachment 44107Attachment 44108Attachment 44109
When i powdercoated my engine 6 years ago i used the very same color! Looks great!Quote:
Originally Posted by SKnight
Sent from my SM-N920P using Tapatalk