That's awesome Jim! Keep it up!
Printable View
That's awesome Jim! Keep it up!
+1, im excited about this and i dont even have a D yet... :wiggle:
I have experience and a good source for rapid prototyping if you're considering using any sort of additive manufacturing for a prototype or mold.
Thread bump!
Any progress? 8)
Yes, still progressing. No new good details to report yet. But certainly still progressing.
On a side note, if anyone can figure out a way to obtain ONE or TWO of these chips...
http://mcrmotorusa.com/IC%20Drivers.html
Or compatible Switec M-S Quad Driver X12.017
It would be a spectacular help. They should be the *key* to a good fluid needle. However the only manufacturer/distributor I've found of them or equivalents will only sell by the case. A box of 100 at $6.50 each. I dont want to buy the whole damn case until I know for sure I can get the electronics to work right. They've told me their "dealer" network only sells their stepper motors.
So there's a little preview of the costs which will be involved in development of this. That box of 100 costing $650 will supply *ONE* component needed twice in each dash, enough for 50 dash units. Fortunately not many other components will have such a high minimum purchase requirement.
Also compatible is a VID66-06 or VID66-08 chip. These are all manufactured in China and seem to only sell in even larger quantities than I can get the other one for. They are all cross-compatible.
***BOUNTY***
If anyone can find me a small quantity (or individual) of these for a reasonable price, I will reward you with $20 or a more substantial discount on the finished product.
There seems to be a bunch of stepper motor ic's on eBay available in small quantities. I know nothing about this stuff but thought perhaps you could have a look there.
Search eBay for stepper motor ic
I have easy access to the actual stepper motors. They are sold by everyone to replace the original bad ones on mid-2000's GM vehicles.
What I'm looking for is a source for new IC driver chips which effortlessly drive the stepper motors in a smooth fluid motion. I've found several compatible chips, but no source to buy a small quantity of them for prototyping.
http://mcrmotorusa.com/IC%20Drivers.html
MS Quad Driver X12.017
VID66-06
VID66-08
mouser.com seems to have a bunch of driver chips available individually.
Small Update...
Dedicated "specific" driver chips are assumed to be not available right now, based on my refusal to buy a very large quantity without knowing if I can get them to work right.
On that note, I have progressed with programming a chip to drive the stepper motor directly. Its a crude program, one for forwards and one for reverse, nothing linking the two or varying how fast it moves and nothing to stop it (except the stepper's physical stop).
BUT IT WORKS.
As I have time on Sunday and Monday to further refine the program, I'll take a video and post it up.