Printable View
SP10663 are repro screws in the correct length with phillips heads.Quote:
Originally Posted by Accipiter
SP10660 is longer but has the OE head style, (not phillips). Way cheaper too. Just be sure to use antiseize on them!
Common hardware store (shiny plated) screw size is M5 x 15.
Has anyone run these in high temps, like the last week for example?
My pump never sounded louder and scarier than the other night while driving in 100 + temps with lower fuel level.
I was just curious how these are holding up in the heat and if they make their presence known....
Yup, I drove up here and it was over 90 and humid. Didn't detect any change in pump sound. So far it's working great.
That's what I like to hear. Keep the comments posted of your high temp long drives. Also note how low you let the tank get.Quote:
Originally Posted by 82DMC12
Are you referring to Pozidrive as opposed to Phillips?Quote:
Originally Posted by DMCMW Dave
I wasn't sure that DMC used Pozidrive as opposed to some more obscure phillips-like head, but yes, that's what I meant.Quote:
Originally Posted by DCUK Martin
Wait.... there are more?!?!?! :eek5:
I buy stainless M5 x 16mm pan-pozidrive screws for the under bonnet area.
Good news...this part is now available for online ordering:
http://store.delorean.com/p-10569-fu...er-module.aspx
Bad news...we're sold out IN TEXAS at the moment and will not be re-stocked until the last week of July.
Contact your local dealer - many of them may still have this item on their shelves for immediate delivery.
James
Awesome James! But more bad news - the link on the product page to download the instructions is broken. I really wanted to read it :)Quote:
Originally Posted by DMCH James
Reload and try again. Works here...
James