I've done some regrettable posts in the past that way :8ball:.
I know! I gotta talk to mike about that, he headed up the smiles.
Printable View
Just thought I'd share a little news with everyone:
I'm finally at a point in my life where I can afford to go back to school, at least part-time. So starting next week, I will begin the task of finishing up my degree, which I started in 1997. Yep, I will be a 32-year-old college sophomore.
So I will have even less time to work on the car! :lol: But it can wait -- I've put off my education for far too long.
Best,
Farrar
Thanks!
I haven't signed up for any classes yet. I will be seeking a Bachelor of Liberal Arts in Music. No concentration yet; I will discuss that with my adviser on Monday. I plan to minor in business or administration of some sort, too -- my goal is to be Program Director of a classical music station some day.
Farrar
Have you considered testing out of some stuff with CLEP testing? I tested out of at least 30 hours worth of classes thanks to CLEP and study guides at www.instacert.com. It took me about a year to get my Associates degree and about 10 years to get my Bachelors.
+1 on the CLEP tests!
IIRC, ~$50.00 and a 1 hour multiple guess test v/s a quarter or semester is a no-brainer.
Now that I've made sure it's possible, I ordered my time-delay relay for the power window circuit. Looking forward to working on this.
I am not looking forward to working on the fuel pump carrier... I see a hacksaw in my future.
Farrar
What have you done to the poor thing?
If I am understanding correctly, you have a 1/8 to 1/4 NPT bushing turned upside down inside the carrier, now stuck on the original pipe. NPT threads are tapered, and brass can gall like stainless steel, so your bushing may well be stuck for good. I have snapped the threads off more than a few stuck brass NPT fittings over the years myself.
I would simply cut off the original pipe, then grab the the stuck bushing and use it to turn the remaining threads out of the carrier. If you want to use a pump with 1/4 NPT ports, just tap the bottom of the carrier 1/4 NPT (I'm pretty certain yours is currently tapped 1/8 NPT). Is your new pickup screen 1/4 NPT as well?
BTW: there is no pressure (above atmospheric) before the pump, and only a couple of PSI after it, so there's no need to tighten the everliving daylights out of these brass fittings.
Bill Robertson
#5939
With the help of a 7/16" deep socket, this is what I did. You had made the equivalent of a 1/8" NPT close nipple, only a little longer. The hole in the bottom of the pipe cap is not tapped all the way through, so I could only turn the close nipple out from one direction.
No; I am re-using the old one.
Farrar
If I remember correctly, your exact words were "I want a carb setup just like yours..."
(You and I are the only ones with that custom piece of pipe. Everyone else has a collection of brass fittings).
McMaster Carr has the best selection of brass fittings. With their help you can adapt that carrier to fit anything.
Bill Robertson
#5939
If that's a joke, I don't get it. If that's not a joke, then it's a poor way to try to help me. Let's not debate what I said in 2008 -- this is 2011 and those fuel pumps are no longer available. Let's move forward.
I have now made the entire assembly as short as I can make it, and with the pickup screen sitting on the bottom of the tuna can, it is still too tall.
I am now seeking other places to mount a fuel pump and am open to suggestions.
Farrar
Relax. I'm just saying there is a reason you don't have a series of brass fittings like Steve (and everyone else) -- I modeled your pickup exactly after mine.
You can mount the pump anywhere. The Loadstar school bus at my church has two pumps: one on the frame next to the tank (opposite side of the frame -- I had to drill a hole through it. Oh joy), and one in the engine compartment on the firewall:
Attachment 4254 Attachment 4255
See if Jim Franklin (JIMJAM) knows how to get up with Jeff Dickey -- Jeff mounted a squarish shaped pump somewhere up front, totally outside the tank.
Airtex 8012's are still available BTW from Advance. You can also buy them online from Summit.
Bill Robertson
#5939
I didn't think you were trying to insult me, Bill. No worries. If I can't relax soon, I am going to take a complete break from the fuel pump problem and work on something else until I can come at it with a clear head.
Mounting the pump somewhere where I can get to it without lifting the car is, for me, the most important thing right now. Someone walked away with my floor jack during the move.
I will have to go exploring at the front of the car to find a suitable place to mount the pump. I realize that in theory I could mount it damn near anywhere, but I want it close enough to the tank to not have to worry about vapor-lock.
Farrar
Vapor lock was caused by cooler gasoline being pulled into a pump mounted on a hot engine (the gas would boil as it approached the pump, and you would end up pumping vapor rather than liquid). Since your gasoline is hotter in the tank than it is on the trip towards the back of the car, I don't think vapor lock will be a concern even with a pump mounted in the engine compartment (provided gas makes it out of the tank in the first place -- if it's hot enough to boil under however much vacuum the pump is sucking, then the system will vapor lock until it cools down).
You can pull though 1/4" fuel line hose OK (it won't collapse) -- I've pumped out tanks with fuel line pulled off the spool so I won't have to cut it shorter (at 15 feet).
Bill Robertson
#5939
Bill Robertson
#5939
Ah, so with an electric pump moun6ted away from the engine, I needn't worry about that -- this is good news.
If I still used the old steel fuel lines, perhaps I could mount the pump where the accumulator is ... I will have to do some exploring after I get a new floor jack.
Thanks,
Farrar
I only suggested near the fuel filter since if you are doing it under the car it would be easier to get to from that location rather than the accumulator cubbyhole. BTW, why not mount it in the engine bay? If you are goning to install it so far down line near the filter or accumulate why not go a bit further and put it in the engine bay, way better access right?
Or just leave the pump in the tank -- very easy access. I am repeatedly removing mine for show & tell (it seems like every new person I meet wants to see a tuna fish baffle in person). I can pop it out in less than a minute.
Bill Robertson
#5939
Despite Bill's assurances, I would still be nervous about vapor-lock having the pump above the level of gasoline in the tank.
With the current pump installed, the access cover under the spare tire well will not close.
Would you like a video demonstration?
Farrar
I'm not the one complaining about Airtex fuel pumps. Quite the opposite -- I am having excellent success with my own pump (as are all the other owners I have helped -- no one outside of Louisiana has experienced a pump failure). Farrar and Steve are the only ones having problems, which seems to indicate an environmental problem, ie: rust. Due to atmospheric moisture, things do rust at an accelerated pace down there. Metal coat hangers will rust hanging in your closet, for crying out loud (can I hear an "Amen," Farrar). If Farrar and Steve's ground connections are rusty, they are going to be putting excess stress on their pump motors.
Ever notice how quickly the steel components on Farrar's carburetor rusted (linkages, machine screws, etc)? That same effect is happening all over his car.
BTW: Farrar can put other manufacturers' pumps in his tank if he wants. I believe Steve is running a Spectra unit.
Bill Robertson
#5939
So would there be any problem having the pump above the level of fuel in the tank? Or am I worrying unnecessarily?
Farrar
All right, then. In order to protect the fuel pump from rusting, I may just mount it in the engine compartment. Stuff in there is reasonably protected from the rain.
Might as well run a new fuel line while I'm at it.
Going to go shopping on Tuesday for a new jack. Since the D is so light, I guess I don't need a very heavy-duty one.
Farrar
I am not looking at cheap ones -- with me under the car, I want good quality! The one I was looking at it rated for 2½ tons. I think that should be sufficient. And no, I am not shopping at Harbor Freight. ;)
My old floor jack was rated for ... I dunno, something heavy -- 5 or 6 tons, I think. That was great, especially since my Chrysler was heavier than the D. But the thing weighed probably 100 pounds. I nearly strained my back every time I had to pick it up, and even rolling it was a pain if the pavement was rough.
Farrar
I tell ya what I do, if the back end has to come up I'll typically take off at least one wheel. Once jacked up enough I slide that wheel under the engine/cradle. I do this as a redundant fail safe in the event a jack stand gets bumped out for whatever reason. If im working on the engine area then I just slide the tire forward a bit. I do this anytime I work in the front as well.
Get a set of ramps - even if the car isn't running you can still jack it up first and slide them under. It makes life SO MUCH EASIER and I don't have to worry about jack stands collapsing. Any time I'm underneath the car I use the ramps unless I'm working so far in that I have to raise it up super high.
Fair enough. I think my ramps are a little higher than average so it's not been an issue for me.
I feel a little less weird about doing things that way now, knowing someone else does it too!
Someone (I can't remember who -- sorry) mentioned that those low-pressure solenoid fuel pumps are better at pushing as opposed to pulling, since they're mostly used in situations where they're fed by gravity. This would seem to make mounting the fuel pump in the engine compartment a bad idea.
I haven't been underneath the car for a while, but I think there may be some free space above the LH trailing arm shield. That would be fairly low compared with the level of gasoline in the tank -- not exactly gravity-fed, I know ... but it would give me the opportunity to mount the pump sideways -- perhaps pulling/pushing fuel horizontally would be easier than pulling fuel up against gravity.
Thoughts?
Farrar