Nixi tubes. Were the only option until 1970.
Printable View
nixie tubes are totally sweet... i don't think theyd match the interior though :wink:
If I may ask a question out of ignorance: why did you decide to use multiple ICs instead of a PIC with multiple inputs and outputs like an Arduino? I ask only because I have seen a BMW gauge cluster driven by an Arduino and I think it had the same number of gauges as our cars. Thanks, and sorry if it's a dumb question!
Farrar
That's a good question. If you have dedicated simple routines than it's better to use many small micros. With large complicated software, you make a simple change in one routine and a bug creeps into something you never intended to change. It also makes circuit board layout much cleaner. These small micros cost from 50 cents to a few bucks. If you use interrupts then that can change the timing anytime you make a software change. We run into this problem at my day job. We share a 700 pin FPGA on a circuit board and when one user makes a change in that FPGA it messes up a lot of other logic timing.
That makes perfect sense. Thanks, Dave!
Farrar
As of right now, no they will no black out. I need to keep consistent parts to try and keep this affordable for people. Too late to back out now anyways Adam, you already commited on one back at the beginning of the thread! :evilgrin:
I will ask if it's possible for a blackout face when getting the main decals printed. If its not horrible, I may let people choose it for an additional cost.
Dave pretty much answered it all. However these chips do have multiple in's and out's. While my software is still in its infancy, the side gauges will be sharing a single PIC with the software loop just going back and fourth updating the gauges. Really easy since none of them have consistent rapid updating like the tach and speedo will. The tach is going to need to interpret the odd-fire RPM signal and update the stepper position sometimes before it even reaches it so the needle doesn't stop-start or overrun the speed. The speedometer will need to keep several odometers in addition to rapid updates.
So the gauges will be lit at all times when the key is on? Even with the visible graphics? Will the graphics be color matched or translucent clear/white for the various color options?
No they will not be lit at all times. Only with the parking/headlights. IF I made a blackout version I would need to modify the back lights to be on extra bright during the day.
Only what is white right now will still be translucent white. Normal illumination color for those will be green. Other colors will be their normal tint and illuminate in those colors. See image in first post of this thread.
Right now the other color options will only be able to do the white lettering (everything green in that first post photo). Once the first set of decals are made I'll play around will all the colors.
Along with the PIC progamming I'm doing now, I'm also making the vector graphics for the decals. Doing much of this work myself should help keep costs down. I'll post visuals of them as I get them completed.