Sent the turbo off for a rebuild. They can't get the compressor wheel.
It is a RotoMaster Ray Jay SN 600586-06
I saw a BAE Systems kit and mine looks the same. Is there a compressor wheel I could fit from another turbo or swap the turbo completely?
RotoMaster do rebuilds/kits but they have no records of this, due age.
Does not work that way. You will need a matched chra with compressor and turbine housings. Wheels are highly specific to makes and manufacture preference for use. Best option would be to adapt the unit to a modern T3 common configuration. We have a seen a few BAE systems updated like this.
Since you are talking about one turbo the assumption is you have the BAE single turbo kit. It is getting harder and harder to have the old turbos rebuilt, parts are getting scarce. It may be easier to find another old turbo or maybe find a more modern replacement. Is there any possibility of repairing the compressor wheel? Maybe another shop can find one or repair your old one. A really good shop should be able to do something to rebuild your turbo.
This is my problem, the turbo rebuild company have no info on the turbo and so cannot get a compressor wheel. The wheel is pitted and holed.Quote:
Originally Posted by David T
The question is, does anyone know if there's a similar wheel that could be substituted?
Or, is there a direct replacement turbo I could get?
With the original measurements you may be able to have one made. Search for companies that offer custom CNC compressor wheels.Quote:
Originally Posted by mickdavies
Sadly 2 companies were approached by the turbo overhauler and both wanted a minimum of 100 units!Quote:
Originally Posted by FABombjoy
Shoot, probably isn’t even 100 running BAE kits out there period!Quote:
Originally Posted by mickdavies
A crackerjack welder should be able to repair pits and holes. Once welded up it gets balanced anyway. Good turbo rebuilders repair parts all the time. I am surprised that the shop you went to can't repair the wheel. Keep looking for a shop that can.