But I would be interested in your least expensive displays... :)
pm sent
But I would be interested in your least expensive displays... :)
pm sent
Quote:
Originally Posted by cpistocco
Care to share when I can find them on a custom made measure?
The original LMB Heeger boxes unfortunately don´t fit my pcb. So I had to make custom boxes.
The same will happend to the enclosures. the total width of my TCD is 260mm in the boxes alone. If you add the thickness of the two lateral enclosure plates it can reach as far as 265mm
For lenght (depth) in the upper section is 100mm, the lower section (which is hollow) has a length of 170mm
The height is 168mm, each box has 55mm of height. Plus upper lid thickness
I´m about to get some 6061 aluminium sheets in the original thickness. Then I can have them cut here and give it the original look. Only problem will be to find someone that can solder aluminium to give the original look in the corners.