I'm installing a similar set now. I don't have a good picture as I'm still installing mine. Keep in mind that you will have to modify the headlight buckets by making the hole bigger. I would also recommend getting a unit that has the DRL wiring either come out the back or via a low profile wire on the side. Some have a large socket on the side that may require you to cut yet another hole into the bucket to fit. Heat should only be an issue if you use a H4 bulb that uses a lot more power then standard (such as the 100w bulbs out there). Here's the unit I'm currently working with:
http://www.jegs.com/i/ORACLE-Lightin...9-001/10002/-1
A local owner has them but in green and they look good. Very bright DRLs too. Here's a quick pic of mine running while I test the heat and beam pattern:
Attachment 39651
I'll be making a full write up later after I get them installed and some drive time done.