FRAMING JOHN DELOREAN - ON VOD www.framingjohndeloreanfilm.com

Search:

Type: Posts; User: SpudMurphy

Page 1 of 4 1 2 3 4

Search: Search took 0.03 seconds.

  1. JB Weld is not a smooth glue ... yup, it seems to...

    JB Weld is not a smooth glue ... yup, it seems to have "stuff" in it.

    I used glue like this ... with the black pigment in it.

    You have to look hard to see it ... I'm happy because I am never...
  2. The holes? ... I performed an "honest repair"...

    The holes? ... I performed an "honest repair" using epoxy glue with some black pigment powder given to me by my guitar building friend. He said that
    It was black spirit stain pigment----- the...
  3. I handrubbed using very fine wet n dry. I used...

    I handrubbed using very fine wet n dry. I used all kinds of wax..some with a blackpigment. Ive seen some nice small detailing polishers with small heads so was looking for advice from anybody who has...
  4. Unpainted Fascias - Urethane is natural Black - electric DA polisher recommendation?

    Hi
    I'm very happy with my unpainted front and rear fascias, and have got them to a good sheen using wet n dry and rubbing compound n wax.
    I just love them.

    However, Id like to take it to the...
  5. Replies
    10
    Views
    2,618

    [Electrical] Did you get the photo Patrick?

    Did you get the photo Patrick?
  6. Replies
    26
    Views
    43,361

    Ron. Thanks for all the great information here. ...

    Ron. Thanks for all the great information here.

    What is the process for using the test lamps?

    Does the car have to be in motion/driving to see the sequence of test lamps, per the logic...
  7. Replies
    18
    Views
    4,840

    [Brakes] Thank you Josh. Your info is much appreciated....

    Thank you Josh. Your info is much appreciated.
    Based on your advice, I'll get a stock biased MC rated at 32/68 to replace the incorrect MC fitted.
  8. Replies
    18
    Views
    4,840

    [Brakes] Do you consider a 50/50 bias to be an improvement...

    Do you consider a 50/50 bias to be an improvement on the 32/68?
  9. Replies
    18
    Views
    4,840

    [Brakes] 32 front 68 rear I too am looking at the...

    32 front 68 rear

    I too am looking at the optimal mc for a stock brake set up?
  10. Replies
    18
    Views
    4,840

    [Brakes] What is the brake bias on the ones you...

    What is the brake bias on the ones you manufacture Josh?
  11. Replies
    18
    Views
    4,840

    [Brakes] Ok thanks Rich. Mine does not have an OE Master...

    Ok thanks Rich. Mine does not have an OE Master Cylinder on there ... a Lucas one that doesn't seem to be used by other DeLorean owners.

    I'm thinking that changing the cylinder will help. So what...
  12. Replies
    18
    Views
    4,840

    [Brakes] Bump

    Bump
  13. Replies
    18
    Views
    4,840

    [Brakes] Thanks for the reply. The reason I'm asking is...

    Thanks for the reply. The reason I'm asking is that I feel I have a brake issue. My car was bought as a project car. A previous owner fitted a non standard Lucas MC stamped FC2F 0795... A rare item...
  14. Replies
    18
    Views
    4,840

    [Brakes] Brake master Cylinder

    I see that vendors sell a replacement Brake master Cylinder which has a bias of 32 front / 68 back, and is stated as being the original type cylinders fitted to DeLoreans. Ironically a 50 / 50 bias...
  15. [General] That is the bracket that moves up and down when...

    That is the bracket that moves up and down when you "power" the window. That bracket seems to have come off the window carrier and that is the reason why your window will not go up n down.
  16. Replies
    29
    Views
    19,778

    OK thanks for the really quick answer. I'm...

    OK thanks for the really quick answer.
    I'm trying to trouble shoot a problem on the binnacle lights.

    I removed the binnacle - had my speedo rebuilt and whilst at it got LED bulbs - except the...
  17. Replies
    29
    Views
    19,778

    Re the first post - providing wiring...

    Re the first post - providing wiring instructions.

    Door Buzzer
    Cut and strip Black wire
    Cut and strip purple wire for constant 12 v feed.

    Q
    Can I leave the buzzer multiplug unplugged...
  18. Replies
    34
    Views
    27,783

    Hi Rod. Whilst recovering mine (outdoors) , the...

    Hi Rod.
    Whilst recovering mine (outdoors) , the wind picked up and the fabric folded over when I was spraying the glue ... on the corner by the sun visor.
    I let it dry overnight - I also purposely...
  19. Replies
    12
    Views
    3,019

    [Frame & Body] I purchased the clip SP10557, as they are...

    I purchased the clip SP10557, as they are advertised as also being used as tread plate clips.
    When I received the new clips they don't have the barb as shown in one of the earlier pictures in this...
  20. Replies
    29
    Views
    9,894

    [Brakes] I used to post a lot on a guitar forum and always...

    I used to post a lot on a guitar forum and always went back to my thread and described the outcome. People come back to me years later saying how much it helped.

    You may be right Dave, insofar as...
  21. Replies
    29
    Views
    9,894

    [Brakes] I wonder how that all turned out? I have the...

    I wonder how that all turned out?

    I have the same problem - initially I had absolutely NO vacuum at the servo .. there was no vac tank in the car either !!!

    Anyways ... if anybody wants to...
  22. Hi Jesse try this one (which I have to say looks...

    Hi Jesse try this one (which I have to say looks a lot like the other one I quoted - but seems to work ok? )...
  23. Stainless clips (part no 10672) from UK vendor

    The DeLorean uses 48 metal clips (Part Number 10672) to grip the strips (Part Nos 106388 - 106392 and 108465) that hold the grills to the engine cover.

    I replaced my 40 year old rusty ones with...
  24. Replies
    9,007
    Views
    2,441,638

    [General] The link to the stainless clips is :-...

    The link to the stainless clips is :-
    https://www.bresco.com/cgi-bin/ss000001.pl?page=search&SS=24170P%20&PR=-1&TB=O&ACTION=Go!&fbclid=IwAR3buJEFtEiMn_Gj4cu-mjekAO9zHiqFYjnck8rIEAeSJ4WvOUXotdHzf5o
    ...
  25. Replies
    9,007
    Views
    2,441,638

    [General] The engine cover grills often need to be...

    The engine cover grills often need to be refurbished during a project and the metal strips that retain the mesh grills are invariably rusted after 40 years. The same can be said of the 48 clips that...
Results 1 to 25 of 97
Page 1 of 4 1 2 3 4