FRAMING JOHN DELOREAN - ON VOD www.framingjohndeloreanfilm.com

Search:

Type: Posts; User: Ron

Page 1 of 20 1 2 3 4

Search: Search took 0.08 seconds.

  1. [Engine] I see "Locked Torque": 28 Nm (20.6 ft./lb.)", but...

    I see "Locked Torque": 28 Nm (20.6 ft./lb.)", but that is the torque the starter develops starting at zero speed??

    I don't know the DMC spec, but Chrysler calls out 27 Ft. Lbs. (50 N.m) for...
  2. Replies
    3
    Views
    139

    [General] It had 2 two cracks, one all the way across the...

    It had 2 two cracks, one all the way across the center and the other ~4 inches: $25 leveling + $450 recover.
    I'll try to get pics this weekend...
  3. Replies
    3
    Views
    139

    [General] I sent a binnicle to DMCMW about a year ago and...

    I sent a binnicle to DMCMW about a year ago and can't imagine anyone doing a better job -- ABSOLUTELY PERFECT!
    Same with an upper console cover.

    The glove box lids from across the pond look and...
  4. [Suspension] Having discussed this thread with the OP, we are...

    Having discussed this thread with the OP, we are happy to announce that it has served its purpose and will be closed.

    It seems that those participating in the banter has potentially come to a...
  5. [Suspension] Well?

    Well?
  6. [Suspension] What are you talking about? Show me a link where...

    What are you talking about? Show me a link where this happened. (Then I'll tell you.)
  7. [Engine] It is more complicated to test... You'd have to...

    It is more complicated to test... You'd have to test from prong to prong, from each of the two to the case, at different temps...and repeat some of that again after applying power to one prong (get...
  8. [Engine] I'd say so, assuming you gave it ample time to...

    I'd say so, assuming you gave it ample time to warm up.

    18 C is (too) close to the switching point. Maybe try again with ice water...
    Increasing (or decreasing) readings don't make sense to me. ...
  9. Replies
    7
    Views
    188

    [Electrical] Put a smaller pulley on it...

    Put a smaller pulley on it...
  10. [Suspension] First, I've never had to do this job... But if...

    First, I've never had to do this job... But if you got the nut off, wouldn't the remainder of the bolt still be stuck in the hole? or is there something else threaded I'm missing or ??
  11. Replies
    48
    Views
    71,785

    Sticky: 66518

    66518
  12. Replies
    48
    Views
    71,785

    Sticky: 66515

    66515
  13. Thread: Eng Cover Striker

    by Ron
    Replies
    6
    Views
    263

    [Frame & Body] FWIW- That looks like it is made for metals. ...

    FWIW- That looks like it is made for metals.

    Try cleaning the hole out , leaving it rough, and use new fiberglass or JB Weld it in.
  14. Replies
    25
    Views
    742

    [Transmission Auto] If you have driven it a bit after the engine is...

    If you have driven it a bit after the engine is warm, yes.


    The time depends on how cold the engine/trans/fluid is. It may take a minute for it to drain down the fill tube when the trans/fluid...
  15. Replies
    25
    Views
    742

    [Transmission Auto] I think I see the problem now...You don't have a...

    I think I see the problem now...You don't have a dipstick with a "L" and a "F" as in the owner's manual.
    I assume your's is like the one I've seen from DMCH. (Has, "COLD WARM HOT" and mystery lines...
  16. Thread: Two problems

    by Ron
    Replies
    11
    Views
    540

    [Electrical] I agree. (Not to mention less draw on the...

    I agree. (Not to mention less draw on the charging system.)
    Handling ~4 amps isn't THE problem with D main light switches anyway -- It's the 4 decades they've been doing it.
  17. Replies
    8
    Views
    533

    [General] Sounds cool, but they look the same in all of the...

    Sounds cool, but they look the same in all of the pics...
  18. Thread: Two problems

    by Ron
    Replies
    11
    Views
    540

    [Electrical] Problem #1: Since you mentioned the fans come...

    Problem #1:
    Since you mentioned the fans come on, note that they are controlled independently from anything involving the temp gauge circuit...

    Problem #2:

    +1

    Power for the headlights...
  19. Replies
    25
    Views
    742

    [Transmission Auto] Here's "the thing". Two actually. First the...

    Here's "the thing". Two actually. First the dipstick is bad about dragging along the inside of the fill pipe, making it hard to tell where the level actually is. Second, you have to allow the fluid...
  20. Replies
    17
    Views
    740

    [Transmission Auto] Looks like 'from one extreme to another' to me,...

    Looks like 'from one extreme to another' to me, but here it is:

    66452
  21. Thread: AC Orifice Tube

    by Ron
    Replies
    29
    Views
    1,147

    [Heat & A/C] Thanks!, Nick.

    Thanks!, Nick.
  22. Replies
    64
    Views
    2,911

    [General] Evacuate it and charge it by weight and you'll be...

    Evacuate it and charge it by weight and you'll be cool...

    ST-29-11/81CATEGORY: TECHNICAL
    ATTENTION: ALL DMC DEALERS/SERVICE MANAGERS
    SUBJECT: FREON CHARGE AIR CONDITIONING
    The freon charge has...
  23. Replies
    1,786
    Views
    493,284

    lol...must be an age thing; they were only off a...

    lol...must be an age thing; they were only off a ~decade.


    The 74 had a 360 AMC. (They went to the wimpy Windsor in 75 ;-)
  24. [Transmission Auto] Power to the GC is on the (G)reen wires. Ground...

    Power to the GC is on the (G)reen wires. Ground is on the (B)lack wires. Check at the red bulkhead connector too .
    66436


    Fwiw, the GC is dumb, it can't learn anything.
    66437


    You can tell...
  25. Thread: AC Orifice Tube

    by Ron
    Replies
    29
    Views
    1,147

    [Heat & A/C] ??? I must have misunderstood what you were...

    ??? I must have misunderstood what you were asking here:
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4