Search:

Interesting

Subscribed.

Just in SWFL, I know of 3 other owners besides me and you.

So that's about 5 in SWFL alone, and there's another 5 or so in SEFL. There's a lot more in central FL though.

I also will eventually try the entire NB Miata knuckle and spindle. Will update here when I have results.

It took awhile but I finally got the bushing spacers from SPC. So I inserted SPC spacer from inside to out on bushings. Rear mount has no other spacer, just the SPC adapter. Front mount has an...

I mean he told me they plan to make them anyways, but with more interest, the more likely it will become a thing.

Wasn't feasible as transmission required frame mods, and the only welder I knew to trust for such a task passed away.


With that said, I have since converted to manual, so the swap is back on...

No idea about Josh with his recent job change, but the DMCH SEMA car had a nice set of 17/18 OE look wheels.

I did talk to James and if they get enough interest, it would be on the table for...

I'm interested in seat design, steering column, hvac setup, and rims from the DMCH SEMA car.


I know the power steering column and steering wheel is Toyota and I'm in the process of planning the...

Kind of. They are 1/2" longer and pretty thick, and it's why 97001 ball joints are required.



And note the 97001 is a smaller diameter stud and taper than the joints that come with the arms....

Still test fitting etc. But so far, RH side is together. Clearance between forward part of control arm and rim is very close, but that could be increased by using a slightly shorter 3/4" spacer in...

The craziest thing is the cluster seems like a simple design. They just put it on screen like a picture. Everything I've seen tells me it's non functional though, otherwise it would have been moving.

That plate above upper shock bolt?

800 series vin so yeah very early.

Got some parts today to do a good test fit, and it clears frame. I'm currently waiting on steering knuckles to get it all together.

70140

Did I mention you?

What is problem here?





Edit: And I first messaged you and figured you were done as I got no response. So I decided to DIY my own setup. Uses same 97001 ball joint that...

I am installing Mustang II upper control arms from SPC. These do require reaming of steering knuckle. Upper taper is simply made to be an exact same size as the OE lower ball joint taper using your...

This has been sold, please close!

Parts remaining:

3- Used lambda ECU with pigtail $49 https://dmctalk.org/attachment.php?attachmentid=69796&d=1687890147&thumb=1


6- Used automatic throttle spool $90...

Great for painted cars. Absolutely stupid on a Delorean except on fascias.

Anybody know his VIN?

I know he didn't open transmission, but for anyone in future that has, you can accidentally put the trans together and not get reverse fork properly set in place. Will have all sorts of problems....

I use Zerex G05 in all my vehicles.


Great HOAT coolant.

I like the design better but it isn't going to happen. Vaporware

I forgot to add, one way to tell if it is an adjustment issue is to remove the shift lever external assembly (cover, spring, button) and the center console plate. Then you go for a drive and pull the...

You'd be surprised.

I dealt with that when I was automatic. It's a tight adjustment and everything else seems fine. You just lose park or 1st.

It's probably the linkage not adjusted properly.

If it's too far out one direction, you can't get 1st gear properly engaged. Too far in the other direction and no park.