Search:

If you do end up needing injectors you could get them from rock auto https://www.rockauto.com/en/moreinfo.php?pk=5227365&cc=1312333&pt=6224&jsn=357

I'd stear clear of any parts from dmch.

Looks like the cable part on this one is slightly longer, you'd have to swap over the one from you're seatbelts or make a new one unless you don't mind it being longer....

There were also some other cars that used the same seat belts as the delorean, or if you don't mind having different seat belts you could upgrade so something more modern.

1980 ferrari 308 had...

You now have the option of having a fender made with digital sheet forming. I'm wondering what their prices are, I'd go with the digital offering over anything dmch would make even if it was more...

When I installed mine I used a large socket, washer, nut and bolt. I kept tightening and it wasn't difficult to get in.

It won't empty the tank, you would need the fuel pump running for that to happen.

I Installed this master https://www.autozone.com/drivetrain/clutch-master-cylinder/p/duralast-clutch-master-cylinder-11958/733832_0_0
with the fork from this master...

You can use a rectangular plate, or find a place that welds aluminum.

When I was in the air force I would drive my car home to California from Colorado. Round trip was over 2500 miles, I did that several times. I never had any serious issues. I also drove it to Ohio...

If it's the motor that failed you can contact the manufacturer and get a replacement.

It's not that complicated, someone made one with aluminum and covered it in vinyl. Then stuck on an end cap with velcro so he could use it as a storage space, I can't find the tread now though.

Maybe yours doesn't work well. It's almost never needed, but I've had to use mine a few times and it's worked great each time. I once hit a large puddle of water, steamed the glass right up, ...

Didn't some one make their own a while back.

It might be nice to have in a second delorean,

I don't know if you can order from rockauto there but here's a link https://www.rockauto.com/en/catalog/chevrolet,2002,silverado+1500,4.3l+v6,1380136,fuel+&+air,fuel+pump+&+housing+assembly,10147

You should have bought one from autozone, lifetime replacements. Can you send it back? I think you add a ring terminal, it's been a while since I did it. you don't have to alter the car's...

The unfortunate reality is nearly everything you buy is from china now. Buying from these sites can save some money by cutting out the middle man. Here's the idle speed motor the venders sell...

In the past I would mostly stay away from these sites, but recently I've started ordering stuff from aliexpress. I just got an empty car battery shell I'm going to use for my super capacitor bank...

I hope you didn't order it from DMCH? I went threw 3 of them before I learned that DMCH just sells junk.
When I did my frame off I looked for something better, I found a metal one for a...

I don't know if that's corrosion, it kind of looks like in winter when I get slush from the road on my car and it dries. It gets into the grain and can be scrubbed away with barkeepers friend. I...

I doubt you'll get another offer, It's seems like everyone wants to pay thew the nose for vendor fuel lines when you could simply replace the nylon lines in your kitchen for a around $30. With...

Also you'd have to get a flange or a press on pulley with that one.

I don't know but it would be interesting to find out. Can't imagine it would be worse then what dmch tries to pass off as reproduction parts.

If your frame does warp, it will straighten out when you have all the weight of the car back on it.

I don't know where you're cracks are but the windshield will crack if you pull on it when you get out of the car, don't get out that way.
That roof box doesn't look good, even if it is still it...