FRAMING JOHN DELOREAN - ON VOD www.framingjohndeloreanfilm.com

Search:

Type: Posts; User: Bitsyncmaster

Page 1 of 20 1 2 3 4

Search: Search took 0.16 seconds.

  1. It's probably something sloppy in the...

    It's probably something sloppy in the transmission. You may be able to increase the throw by modifying the location where it connects on the tranny shorter or where it connects on the shifter longer...
  2. Replies
    17
    Views
    298

    [General] I still have a set of OEM fans mounted on an OEM...

    I still have a set of OEM fans mounted on an OEM radiator and OEM fan shroud. I will use those to compare when I start testing that new brushless fan. I wish I had a junked AC condenser on my test...
  3. Replies
    5
    Views
    129

    [Wanted] If these others fall through, I have an OEM knob...

    If these others fall through, I have an OEM knob also. I would think you just polish it on a buffing wheel if you want more shine.

    Were the numbers and decal painted on OEM knobs? I don't see...
  4. Replies
    17
    Views
    298

    [General] That would be great. By the way, I had a...

    That would be great. By the way, I had a customer insist on keeping OEM fans which were drawing 15 amps each when he was at my house. But that would trigger my overheat warning on my fan fail. He...
  5. Replies
    17
    Views
    298

    [General] Find a spec sheet showing less power for equal...

    Find a spec sheet showing less power for equal air flow and I will order one just to test it. You know I love to reduce current consumption and I have a hot wire anemometer.
    .
  6. Replies
    6
    Views
    124

    [Heat & A/C] With AC on your fans are running all the time so...

    With AC on your fans are running all the time so my guess would be the radiator is not cooling enough. If you have already flushed it and verified your water pump is working, I would think about...
  7. Replies
    17
    Views
    298

    [General] I like the idea of less power but have not seen...

    I like the idea of less power but have not seen any data to prove that. Race cars don't use AC, or do they?
  8. Replies
    17
    Views
    298

    [General] This all may be good for a race car but with AC...

    This all may be good for a race car but with AC the fans need to be moving as much air as possible. I do like the idea of ramped up start current but that is only nice if your fans are switching on...
  9. Replies
    44
    Views
    839

    [Heat & A/C] They also say you can't control them with a...

    They also say you can't control them with a switch or relay. Now what does that mean? With the paperwork so poor and the price so high I would not want to experiment with that manufacturer. Now if...
  10. [Fuel] Here is the bulkhead wire list. I fixed the...

    Here is the bulkhead wire list. I fixed the original because it did not state the two grounds that are used by the Lambda ECU. Look at wire #22 and #23.
  11. Replies
    44
    Views
    839

    [Heat & A/C] I've measured some OEM DeLorean fans to draw 15...

    I've measured some OEM DeLorean fans to draw 15 amps each. Most vendor fans run from 7 to 9 amps each. Looks like your going to need to run 8 AWG wire for your dual fan power.
  12. Replies
    44
    Views
    839

    [Heat & A/C] That graph on the 10" looks strange. From what I...

    That graph on the 10" looks strange. From what I see one fan draws 20 to 33 amps.
  13. Replies
    44
    Views
    839

    [Heat & A/C] Have you looked at the specifications of...

    Have you looked at the specifications of brush-less fans? Just wondering what the advantage is. Maybe longer life since brushes may wear out.
  14. [General] The MEK worked removing the paint and did not...

    The MEK worked removing the paint and did not seem to do any harm. That was many years ago and it still looks the same.
  15. Replies
    26
    Views
    2,184

    [Frame & Body] The freeze spray is just R-134a in a can so if...

    The freeze spray is just R-134a in a can so if you can't find it you may be able to rig something up with a can of AC charge. You want the liquid to spray onto the aluminum.
  16. Replies
    26
    Views
    2,184

    [Frame & Body] Maybe heat and if you can get a freeze spray...

    Maybe heat and if you can get a freeze spray quickly freeze it (used in electronics troubleshooting), and the shock will break the bond.
  17. Replies
    26
    Views
    2,184

    [Frame & Body] If it's epoxy glue, heat can soften it. And...

    If it's epoxy glue, heat can soften it. And epoxy does not bond that good to aluminum. I've had aluminum epoxy break free when it sees temperature cycles.
  18. Replies
    8,745
    Views
    1,866,149

    [General] Leaded gas has a larger fill pipe on the...

    Leaded gas has a larger fill pipe on the dispenser. The cars for unleaded put the restricter in the fill pipe to the tank. So you could not fill up with leaded gas unless you removed the...
  19. [Engine] What the thermistor does to the stock idle ECU is...

    What the thermistor does to the stock idle ECU is limit how much the idle motor will close. High resistance (cold about 50 Kohms) and the idle motor will probably not close much past 1/4 way open. ...
  20. [Heat & A/C] At idle your compressor may not cycle if your...

    At idle your compressor may not cycle if your blower is on high and the air ambient temps are high. If your blower is on a lower speed it probably will cycle. Or blowing a fan at the front of the...
  21. Replies
    20
    Views
    1,367

    [Transmission 5-Speed] I'm pretty sure PCV stands for positive crankcase...

    I'm pretty sure PCV stands for positive crankcase ventilation. Back in the old days all engines just used a pipe that extended down under the engine which was cut to draw a very slight vacuum from...
  22. Replies
    6
    Views
    322

    [Electrical] When ever possible, I replace those quick connect...

    When ever possible, I replace those quick connect pins with ring terminals. Especially on high current circuits like the fan breaker and blower breaker.
  23. Replies
    55
    Views
    3,580

    [Electrical] Yes an anodized coating could insulate the...

    Yes an anodized coating could insulate the contact point.
  24. [Fuel] Will the old gasket fit in the new cap?

    Will the old gasket fit in the new cap?
  25. Replies
    55
    Views
    3,580

    [Electrical] I was just thinking the same. I run that...

    I was just thinking the same. I run that tensioner and have no problems.
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4