FRAMING JOHN DELOREAN - ON VOD www.framingjohndeloreanfilm.com

Search:

Type: Posts; User: at88mph

Page 1 of 2 1 2

Search: Search took 0.03 seconds.

  1. [General] Anyone have a console clock housing for sale or know of a cross reference?

    My center console clock works fine, however the housing it sits in cracked and the cover was all scratched up :( Just wondering if anyone had a housing for sale or knows of a cross reference part...
  2. Replies
    2
    Views
    1,143

    [For Sale] Interested in the crossbrace if ya still have...

    Interested in the crossbrace if ya still have them. Can you let me know what it would be shipped to 36571? You can email me at [email protected] as I'm not on here too often :)

    Thanks!
  3. [Heat & A/C] Replacing a/c system but don't have high pressure setup? Red Tek vs 134a?

    So I've decided to replace the whole ac system since it hasn't worked since '92. Today I installed new compressor, condenser, hoses and am putting on the evaporator, low pressure switch and orifice...
  4. [Suspension] Great! :) Thanks for the info! :cheers:

    Great! :) Thanks for the info! :cheers:
  5. [Suspension] Any tips/advice on replacing the lower control arms?

    Welp, just got my new LCA's from DeLorean Go and plan to install them this weekend. Any tips or hints I should know about? I also got the Drayron tail light circuit boards and they are AMAZING!! ...
  6. [Suspension] Thanks for the replies and info everyone! :) I'll...

    Thanks for the replies and info everyone! :) I'll order them tomorrow! :cheers:
  7. [Suspension] Anyone here have the DeLoreanGo lower control D-Arm?

    Going ahead and replacing my lower control arms and was looking to purchase DeLorean Go's LCA's (D-Arm set)

    https://www.deloreango.com/en/aluminium-lower-control-arms.html

    Anyone have these...
  8. Replies
    74
    Views
    37,006

    Just curious, does anyone have or know of a...

    Just curious, does anyone have or know of a source for the green cover? My stock clock STILL works fine (knock on wood) but my green cover got broken YEARS ago.
  9. Replies
    0
    Views
    1,545

    [Wanted] Looking for black center knee pad pn 108592

    Just seeing if anyone has a black knee pad (the one to the right of the steering wheel) part number 108592.

    Thanks! :cheers:
  10. Replies
    5
    Views
    1,111

    [Suspension] PERFECT!!! :) Thanks so much for the replies...

    PERFECT!!! :) Thanks so much for the replies everyone! White out, I sent ya a PM! Thanks for anything you can do! :cheers:
  11. Replies
    5
    Views
    1,111

    [Suspension] Do any of the vendors rebuild the LCA/UCA's?

    So finding anyone to work on the DeLorean in my area is EXTREMELY hard to do (not a big deal bc I do most of the work myself) and I would honestly rather have one of the DeLorean shops rebuild my...
  12. Replies
    14
    Views
    3,636

    Wow!!! That looks amazing!! Great job!!!

    Wow!!! That looks amazing!! Great job!!!
  13. [Suspension] Thanks again everyone for all the replies! :) I...

    Thanks again everyone for all the replies! :) I just decided to leave it to a well recommended local shop to look over and see what's going on. Once I know, then I'll order whatever parts they...
  14. [Suspension] Thanks for the replies guys :) The rack is...

    Thanks for the replies guys :) The rack is fairly new (installed a new one about 4 years ago) and what really worries me is reading everything on the subject lol. I DEFINITELY want to replace my...
  15. [Suspension] Recommendations for upper/lower control arms with control arm support?

    Ok so my 81 still has the original upper/lower control arms (and balljoints :jawdrop: ) on it and as I'm driving it feels like the car is drifting a little from side to side and the alignment is good...
  16. Replies
    36
    Views
    11,792

    [Transmission 5-Speed] Easy now!! :cheers: Yea, I know the 4.3 isn't a...

    Easy now!! :cheers: Yea, I know the 4.3 isn't a power house BUT it is dependable (believe me,when I did my swap, I wanted so bad to put in the spare LS6 I had in it but) at the time my DMC was an...
  17. Replies
    36
    Views
    11,792

    [Transmission 5-Speed] I Haven't read EVERYTHING in the thread bc I'm...

    I Haven't read EVERYTHING in the thread bc I'm lazy like that but, I have a 915 in mine and if you're mating it to the stock PRV, it will easily handle it however, I don't know of anyone who makes a...
  18. Replies
    10
    Views
    1,882

    [Electrical] ***UPDATE #2 Got the low beams working! I...

    ***UPDATE #2 Got the low beams working! I checked for continuity between the blue wire coming off the headlight switch back to the low beam relay and got no tone. Long story short, it was a loose...
  19. Replies
    10
    Views
    1,882

    [Electrical] Thanks! :) I'm pretty positive they are as I've...

    Thanks! :) I'm pretty positive they are as I've pushed up on each one of them and moved them around as much as I could just HOPING the low beams would even flicker but no luck. I even put jumpers in...
  20. Replies
    10
    Views
    1,882

    [Electrical] ***Update*** Got the high beams working now...

    ***Update*** Got the high beams working now (jumped the brown power to the blue/white wire and when I did, I felt the blue/white slipping out of the socket) I put the relay back in place, checking...
  21. Replies
    10
    Views
    1,882

    [Electrical] Thanks! :) I know just enough to be dangerous at...

    Thanks! :) I know just enough to be dangerous at this lol....so what wires should I jumper to test? (I do know the relays are good)
  22. Replies
    10
    Views
    1,882

    [Electrical] David, thanks for the reply! That's where I'm...

    David, thanks for the reply! That's where I'm lost in this! I know I don't have power to fuses 14 or 15 at all. So is that what the headlight switch does? (ie there is supposed to be NO power...
  23. Replies
    10
    Views
    1,882

    [Electrical] Thanks for the reply :) I swapped out the OEM...

    Thanks for the reply :) I swapped out the OEM switch for the DMCH switch a few years ago. That's how I tested as I put the OEM switch back in place. I don't think it's related to the switch tho bc...
  24. Replies
    10
    Views
    1,882

    [Electrical] Need help with headlight issue

    Ok so neither my high nor low beam headlights work. I know what the issue is BUT I don't know why. Both fuses are good but I took out the fuses and took a test light and checked where both fuse...
  25. [Engine] Well for me, I went with the Vortec 4.3 V6 back...

    Well for me, I went with the Vortec 4.3 V6 back in 2000 b/c there wasn't NEAR as many swaps that had been done and not much info out there. I originally wanted to go LS1 but with the auto trans, and...
Results 1 to 25 of 50
Page 1 of 2 1 2