Search:

https://youtu.be/3wUrEkepSfU?si=Vfm8IFtTIfni3k93

Maybe this has been done. It bypasses the idle motor.



Dave B.

Delorean Industries gets there fuel sending units from Dave McKeen. So just get it from Dave.




Dave B.

I also put in a new clutch last spring and cut mine at .020 because that is what Mike at Delorean Midwest will tell you.



Dave B.

I think it was definitely to protect the original line from the heat. Just this weekend I was at a show and this guy asked if I lost my clutch when running the A/C. I confusingly said no. He...

This is what I used when I replaced the master and slave on my car. I used the reverse method and needed to do it once.

They cost a little over $50 Amazon.




Dave...

There's a LH one on ebay. Or I would just start calling the vendors to see what they have.




Dave B.

#17.





Dave B.https://uploads.tapatalk-cdn.com/20240730/967a34046aeb435b9250b4441fa4e069.jpg

Sent from my SM-G991U1 using Tapatalk

OK. Exactly what I was thinking would happen than.
I do have a extra incase.



Thanks
Dave B.

Sent from my SM-G991U1 using Tapatalk

I also had similar problems when my clutch hydraulics stopped working. I had a leaky slave but the master quit working before that did and the peddle whent really light. I made it home from a trip by...

I personally have done over 800 miles round trip. I have met owners that have done over a few thousand. I would say pack a few tools and a extra alternator belt. I always do. There not a common thing...

I also like the SONAX and this lug nut brush from Autozone under 5 bucks. The bristles are on wires so they can be twisted. Works perfect and speeds up getting in between the fins/spokes what ever...

2464

In Minnesota if you have collector or any other of the plates they have for older cars you don't have to put on the one for the front. All the other regular plates you do.



Dave B.

Simple answer. No it's not going to be cold. Just connect the hoses at the engine until your ready to put the heater core in the loop. This is a very common thing to do.




Dave B.

You can find it at Wal-Mart.https://uploads.tapatalk-cdn.com/20240520/e3d01e67d29215fd393628a3871267fa.jpg

Sent from my SM-G991U1 using Tapatalk

Installed a set of strut mount covers from Dgo. Luckily there reproduction. I had to do a little trimming because the luggage rack hinge was a little too close.




Dave...

On the subject of cleaning. As suggested above and thought I would start experimenting with it. This is for a waterless cleaning option and not for a deap clean. So far the test area was the front of...

I agree I can see it know. If he didn't highlight it the way it is.


Dave B.

Just a guess here. Look on the left corner of the condenser where the a/c hose goes, there should also be a switch. Is the plug on the switch? It kinda looks like the plug for that switch if the...

Well people get the Delorean mixed up with the Bricklin. The Bricklin had the AMC than the Ford Windsor. The Tucker had a flat 6 piston helicopter engine.



Dave B.

Thats because the one you pictured is an original. The other ones pictured are the only aftermarket lighted keys ever made.
My original is missing its spring so it doesn't work.




Dave B.
...

This isn't an original DMC key. They were made by a vendor 35 + years ago. That is far as my knowledge goes. If someone has more knowledge about them it would be great.

This is a picture of the...

I also took mine to my cycle shop. They had a little bit of a fight with it because the rubber was pretty stiff.





Dave B.

Sent from my SM-G991U1 using Tapatalk

I had the same concern a year ago when I did mine. I did exactly what you're going to do and there were no problems. I gave the wheels a good cleaning removed the old weights and all. I could tell...

Now that you got it clean, people are going to want to touch it. I swear if people knew it was electrified, they would still want to touch them!
My pet peeve is people asking how hard it is to keep...