Search:

Parking/blinker. Yes




Dave B.

Headlights will still work fine but the front blinker lights will need to be changed.


Dave B.

Sent from my SM-G991U1 using Tapatalk

I can also say yes because I've done it. You will definitely have to pull the sway bar. If you have a friend that is willing to help get em because it will be a pain in the butt doing it all by...

If you still have the door lock silinoids you can switch them out for actuators. Dumping the weight can help. Most need to detorque the torsion bars after its done. I did.







Dave B.

Melting of fuse 7 is a very common problem. I've also had this problem. There are many things in this loop that can cause the heat. Most common is corroded pins and certain items like the fuel pump...

Ya it disappeared quite a while ago. I remember someone posted pics on Instagram shortly after. Hopefully it's safe and someday someone can recover it.




Dave B.

https://youtu.be/3wUrEkepSfU?si=Vfm8IFtTIfni3k93

Maybe this has been done. It bypasses the idle motor.



Dave B.

Delorean Industries gets there fuel sending units from Dave McKeen. So just get it from Dave.




Dave B.

I also put in a new clutch last spring and cut mine at .020 because that is what Mike at Delorean Midwest will tell you.



Dave B.

I think it was definitely to protect the original line from the heat. Just this weekend I was at a show and this guy asked if I lost my clutch when running the A/C. I confusingly said no. He...

This is what I used when I replaced the master and slave on my car. I used the reverse method and needed to do it once.

They cost a little over $50 Amazon.




Dave...

There's a LH one on ebay. Or I would just start calling the vendors to see what they have.




Dave B.

#17.





Dave B.https://uploads.tapatalk-cdn.com/20240730/967a34046aeb435b9250b4441fa4e069.jpg

Sent from my SM-G991U1 using Tapatalk

OK. Exactly what I was thinking would happen than.
I do have a extra incase.



Thanks
Dave B.

Sent from my SM-G991U1 using Tapatalk

I also had similar problems when my clutch hydraulics stopped working. I had a leaky slave but the master quit working before that did and the peddle whent really light. I made it home from a trip by...

I personally have done over 800 miles round trip. I have met owners that have done over a few thousand. I would say pack a few tools and a extra alternator belt. I always do. There not a common thing...

I also like the SONAX and this lug nut brush from Autozone under 5 bucks. The bristles are on wires so they can be twisted. Works perfect and speeds up getting in between the fins/spokes what ever...

2464

In Minnesota if you have collector or any other of the plates they have for older cars you don't have to put on the one for the front. All the other regular plates you do.



Dave B.

Simple answer. No it's not going to be cold. Just connect the hoses at the engine until your ready to put the heater core in the loop. This is a very common thing to do.




Dave B.

You can find it at Wal-Mart.https://uploads.tapatalk-cdn.com/20240520/e3d01e67d29215fd393628a3871267fa.jpg

Sent from my SM-G991U1 using Tapatalk

Installed a set of strut mount covers from Dgo. Luckily there reproduction. I had to do a little trimming because the luggage rack hinge was a little too close.




Dave...

On the subject of cleaning. As suggested above and thought I would start experimenting with it. This is for a waterless cleaning option and not for a deap clean. So far the test area was the front of...

I agree I can see it know. If he didn't highlight it the way it is.


Dave B.

Just a guess here. Look on the left corner of the condenser where the a/c hose goes, there should also be a switch. Is the plug on the switch? It kinda looks like the plug for that switch if the...