Search:

This is the first time I've heard of anything negative about the Wings B Cool setup. Did the cars you work on have any of the issues you've listed? Did the thermostat stop working? While I agree...

I just installed DPNW's adjustable fan switch about a month or so ago. Unfortunately, haven't been able to test it on hot days yet (have to wait until next year) but I'm happy with the way it works...

Thanks for the reply. Are the poly bushings "bad" or have a tendency to fail? I always thought that the Poly option for suspensions was the "better" option.

What bushings did you use as replacement? I want to get these changed out this winter, but debating between Poly or rubber bushings.

I purchased the adjustable fan switch from DeLorean Parts Northwest: https://www.delorean-parts.com/product/wings-b-cool-adjustable-fan-switch/

While I haven't installed it yet due to having to...

I also have the Hankook Kinergy tires and I'm very happy with them.

I installed DPI's Aluminum LCA last year. Very similar, only difference is I got the ones without the spring cup since I also installed DPI's coil-overs. Very happy with them. They are a lot beefier...

Sorry for the delay, the tires are fairly quiet. However, I never paid attention to the old ones to tell if the new ones are quieter, the same, or louder. I usually have the radio on when driving. I...

You’re on!

The fastest I’ve gone so far is 60-65mph on country roads, so I haven’t been on an actual highway yet. They seemed quiet, but I wasn’t really paying attention to that. I also like to have the...

6427164272

Got the tires installed yesterday. They replaced 12 year old Prime-Well's that the PO had installed when getting the car back on the road in 2011/2012 (so that means they were already 4...

I ordered the Hankook Kinergy ST set and they were delivered today. I’m hoping to have them installed in the next week. My plan is to put the RWL on the inside as well. I’ll report back with pics...

I originally just installed the back portion of the bleeder kit since that bleeds "automatically" and that's what I was worried about. However, I just installed the front portion this weekend and it...

I just replaced my front and rear suspension with DPI's coil-over kit. Very happy with it, both front and rear are height adjustable for ride and they have 18 settings for softness/stiffness. The kit...

Installed this kit last weekend. After an email to Josh about a few parts and where they went everything went smoothly and is pretty straight forward. I haven’t been able to drive it much yet...

Parts came in last week from DPI. Awesome quality for everything. I can't wait to get to get it installed!

Thanks everyone for the replies. It seemed the overall consensus was that coil overs are the better way to go.

I ordered DPI’s kit sans the front end recall parts (already on car). Can’t wait...

Can you adjust the ride firmness/softness with these? It says adjustable on the website, but I don't see the dial in your pictures. However, the picture on the front cover of the instruction PDF...

Thanks for the explanation!

How do you go about ordering the different options? When I'm ready to order, I would be interested in the Standard lowering.

What does this actually mean? I thought the coil overs were...

Thanks for the replies so far. Sounds like coil overs are the preferred upgrade. I'll start looking at those more.

Any other input is welcome.

Delorean Industries - Couple of questions:
-...

I'm planning a suspension upgrade to 2805 including new shocks, springs (lowered front), new front lower control arms, and strut tower brace. I tried searching the forum, but couldn't find much with...

Interesting little article on Autoblog comparing the stainless panels of the new Cybertruck to the DeLorean and potential issues.
...

I was able to find the 022 injectors on Rockauto, but they weren't listed under DeLorean it was a Volvo but I don't remember which one. You should be able to search on the part number and find them.

You can get brand new injectors from RockAuto for around $38 for the exact part number of our injectors or $42 for the “DeLorean” part number (I believe it’s 62708, but I don’t remember...