Search:

There have been several six figure cars sell in the past few years. Bring A Trailer has sold the majority of them.
All of them have something in common, they are modified. BTTF replicas, and as...

I think it is important to understand that a used 41 year old car is not going to be perfect.
I recall you did a fairly sizable road trip immediately after purchasing the car without issue, that is...

The QA1s are used on other applications, most of them heavier than our cars. You have to have them at the bottom end of their adjustment to have a somewhat "comfortable" driving experience.
The KW's...

If you get a liter it should do you.

I was lucky enough to get my car on one of their magnets.

https://i.imgur.com/B1yFGq7.jpg

Ok, this is what motor I thought it was. Fits very nice. The gears are turning in my head now...

Looks like they did a nice job, albeit very late.
I like how they put everything together in a common case.
I wonder what the weight bias is now though.

What motor did they use, forgive me if...

I think that will be the next wave of "engine" swaps.
I don't think I would ever EV swap my car as it is my primary roadtrip vehicle, but I would love to EV swap someone else's and offer kits if...

Until you attach the throttle and kickdown more directly to the carb, you will not be addressing the underlying issue here.
It is my opinion you should be removing the stock throttle spool, and the...

Thanks for the plug nick!

Rob and I have been talking and i was actually able to help him a little with his setup.

Adjust the strikers to make the doors close properly. Do not adjust them for cosmetic issues. You will likely not get the result you want and the doors will not close as well as they once did.
...

There are 40 LS swapped deloreans in the world that i know of.

43% of these swaps are running driving cars. The remainder are currently in progress.

I have sold 22 swap kits to date.

This is one of my customers, located in TN. If you PM me I can give you his contact information.

He is using an LS4 (mostly stock, just a cam) with the stock transaxle. He is running a Holley...

Hello from Canada,

we have been dealing for this for about (forever) years now.

As an extra gut punch after it sits at the border for however long they may send it back or send you a nice bill...

That's the needle getting stuck against the clear plastic of the cluster. a well placed smack on the side of the binnacle will free it.

You made me go out in the cold and measure my spare transaxle in the shed! It is indeed 3/8" NPT

looking forward to it, thanks again for leading the charge rich. No pressure!

drain and fill are 1/4" NPT

google is a wonderful thing.

the plastic is not molded on.

You can still buy them new.
Part numbers
4-154719-0 (housing)
160759-1 (terminal)

I have not been successful removing the housing especially on old brittle connectors. it is likely possible. ...

its yellow zinc plating.

This is just awful, im sorry to hear this. that is a long time to have your car gone.

we miss you in facebook land!

I am thinking this is the case.