I have had a similar issue with my left rear bearing, I've tried three different bearings and a few different Loctite sleeve locking compound. Even shimming metal between the bearing and housing....
Type: Posts; User: vwdmc16
I have had a similar issue with my left rear bearing, I've tried three different bearings and a few different Loctite sleeve locking compound. Even shimming metal between the bearing and housing....
Removing the sliders is the easiest option, you will gain 1.2" of room, you will need to drill new holes in the floor and add larger washers under the car to prevent them pulling through.
The lower...
There is no need to add inproves safety devices for the new builds, the low production bill only states the engine has to be emissions compliant. No way at all a D could pass modern crash testing
...
Thats excellent!
My car hasn't hasn't had the old noises comeback after I repaired the fiberglass.
Thats right the single hose pointing forward should never have gas coming out, if so, the accumulator is bad
And like everything else it was all easy bolt on no modification needed huh!?
;)
I've put poly UCA bushings on a few cars now. It does not make anything harsher.
Can confirm 115lb
Good on you man! still at it! love seeing any progress you get up to. Any set plans for the braking system?
You need R12 service fitting. They're like the R134a but they screw onto the threads for R12. Screwing them on the presses a small needle in the center which opens the Schrader valve. You need to...
I am a big Proponent of engine swaps, More the merrier! But as a German car mechanic that works on VAG cars, I'd never put on of those engines in, I hate working on them and have seen alot of...
Said it before but I love Redline MTL, I've had a few cars delorean and not that would grind gears and shift poorly until MTL went in and transformed it. I don't know what magic they have in that...
Thanks! Here's some more beauty pics from my drive up in the hills on my last birthday.
https://hosting.photobucket.com/images/c396/vwdmc16/20191228_112450.jpg?width=1920&height=1080&fit=bounds
...
Hi everyone, feels like another year has gone by, just 5 months, anyways not that many big things with the car. Ive been working on a few local cars that need more work than my car, and they help pay...
Also interested in the fans, and how loud they are.
How quiet are they at highway speed?
Still an odd fire engine? I've been looking more info on 6 coil ignitions still odd fire. Such little aftermarket support for our rare odd firing order.
Good luck on your sync loss issues
One more item I upgraded while the engine was out was a oil pan baffle, ive noticed loss of oil pressure on really hard turns. This 1/8" thick aluminum plate I TIG welded into the pan should help...
Is that a cheap press? ive had a Harbor frieght press that wouldnt push many things out, had to use a bigger 20 ton press. I second burning it out and then cutting the old outer shell. you will have...
Subscribed! Looking forward to it!
Nice, glad that gave a good reply, I wonder what the unit thinks is happening when it sees a odd fire signal.
Can it handle an odd fire ignition signal?
Its a tricky seal but it is possible, Ive done half a dozen of them, still holding for now.
Is it possible the transmission input seal is leaking? Mine did that after my first transmission re...
I also had shifting problems with my car when I got it. , 2nd gear going into 3rd gear and popping out of 5th gear. . When I change transmission fluid from regular gear oil to Redline MTL, The...
To be clear are you talking about cam timing or ignition timing? 16-18 Btdc sounds like ignition