Search:

This is some nice work. Do you think these are possible via 3d printing?70004

He towed to to a parking lot where he turned the car around on the trailer

Yoooo, I was nervous for the girl with her head in the door opening! 😬

It was on the ledge right under the passengers arm rest.

Any idea what this is from?

Mine have cracked rubber, but this is a job I have decided to skip, after calculating the risk vs reward. 😬

https://youtu.be/15w0niN9eFU

Going to check them out, thanks!

I need to have the evaporator replaced. My car has been serviced at pj Grady since it was new. Unfortunately, Rob is not taking any work
at this time, due to a few different reasons. Does anyone...

This is where my ac job ended in September, I pulled out the office removal tool, with no orifice attached, and a hole in the evaporator coil pipe. I think I'll have to throw in the towel and bring...

I'm going to flush the condenser today, then route the new hoses. A a couple of tests tug on the suction hose wasn't budging it at all.

Can anyone tell me if this is a broken orifice tube? It's 2 inches into the evaporator pipe.68831
And how can I get it out?
Thanks

Did you pull the old hoses from the engine bay, back, or pull from the front?
Thanks for the help

I have the DPI replacement hose kit. I have removed the old accumulator and all the old hoses are disconnected. Tomorrow I will flush the condenser and the evaporator separately once I'm able to...

It's an Italian flag, all the guys around the car had Italdesign jackets on with the Italian flag on them.

Is this anyone on this forum? 😂68766

Thanks for the tips, with a manifold gauge should I be able to add the sealant myself?
Jason

I've been losing pressure in my AC system, enough over a week to have the compressor stop engaging. I had my mechanic check it out and refill the system with dye and he found no leaks. Water...

Ok, thanks I left them on, I thought they may have been put on by the previous owner to counter the broken bearing.

I just got the four seasons blower motor to replace mine with a shot bearing. Should I leave these clips on the cage?68660

So I thought overnight slow charge did the trick. But now the battery light never comes on. I also need to rev the engine one time up to 2500 to get the volts up above 12. My alternator has the 2...

I figured as much. Can you recommend a replacement motor? Delorean go has one, but it doesn't utilize the motor cooling hose. Would that matter?

I'll have to check tomorrow, what would it mean if it does go out while running?

Yes it does

So I took my blower motor out to see why it was so loud. After I put it all back together the battery was dead. Now when I jump start it, it stalls out with a completely dead battery shortly after...