Search:

I pulled the injectors and did some flow tests into graduated cylinders. The volumes were all within a few milliliters of each other, but I did notice that one of the injectors continued to weep fuel...

Thank you for all the suggestions. I will try them out and report back.

My car has a hot start problem that persists after replacing check valve, accumulator and PPR O-rings. It will eventually start with enough cranking, if the battery doesn't go dead first. It just...

Thanks, I would appreciate that!

Does anybody know where I can purchase a copy of this print/poster?

69815

My tech already has these very same documents. He called BAR because the document is ambiguous. It's poorly written. If you read it closely, it says that the charcoal canister and the lines must not...

Hi Rich,

I'm not looking for a waiver of the entire test. I'm assuming the "fuel system check" that the original poster is referring to, is the low pressure EVAP test. This is a separate portion...

I tried contacting DMC CA about getting a copy of this waiver letter, but haven't heard back from them yet. Has anybody seen this letter, or have a copy that they can share?

1) Check that all 3 of the electrical plugs are connected to the back of the mode switch.

2) Check that the rubber diaphram inside the mode switch is not broken.

3) Check that all vacuum lines...

Did they cut around the exterior rubstrips, or remove them for the wrapping process(then reapply them)?

First, my AC started acting funny. Then, my heater stopped working. Finally, I could hear the fan running, but no air was blowing out the vents. So I reluctantly dug into the mode switch for a second...

I wonder how this car is going to fit into their business plan, now that the "low volume motor vehicle manufacturing act" has finally passed. I mean, Houston can just start building the actual car...

Please elaborate. What was SonnyV vs. James Espey?

No backup cable, I prefer living life on the edge. Luckily, I was able to grab onto the frayed end of the cable with some pliers and pop the hood. Honestly, I don't understand the need for a backup...

I knew this day of reckoning would eventually come. My hood latch cable finally broke. I tried to fix the existing one before, but it was so frayed I could no longer thread it into the set screw....

However, you may take a hit on resale value, when you disclose that it has a straightened frame.

My Delorean is no "show car," but I'm thinking about going this year. I only live about 20 minutes from Dixon, so no real excuse not to go. Besides, I'd love to see some Lotus Esprit!

The previous owner of my car installed a yellow top Optima battery about 3 years ago. I haven't had any problems with it so far.

I've begun polishing out an annoying arc-shaped scratch across my windshield that was left by one of the previous owners. They must have been using some really old wiper blades. I was actually pretty...

Definitely some managing of expectations going on in this press release. I don't see any pie-in-the-sky promises being made, maybe even some sand-bagging.

Overall, I think this is one of the better designs I've seen. I feel like the taillights are one of the iconic features of the original Delorean. It would be nice to see that somehow referenced in...

In addition to the rock solid feeling, another thing I really like about the DPI LCAs is the ability to center the tire in the wheel arch. It doesn't look like you would have that ability with some...

You're not the only one that had the same thought about the stock LCAs, but the rest of the build is PHENOMENAL!

Installed the Eagle starter. Seems to work good so far. I was worried that I would have to loosen the stock exhaust manifold to the get the OEM starter out, but didn't have to. After removing the oil...

I seem to have an issue brewing with my starting system. It hasn't left me stranded yet, but it's happening with more frequency. It's sounds like my starter stays engaged a good 5 to 10 seconds...