1981 DeLorean body on a 1988 Bronco II 4x4 frame.
http://www.youtube.com/view_play_lis...B74D020CFC7D34
Location: Hickory Flat, MS 38633 (redneck yee-haw)
Posts: 111
My VIN: 04875 4x4, 05538 sold in 2010,
Club(s): (SEDOC) (DCUK)
1981 DeLorean body on a 1988 Bronco II 4x4 frame.
http://www.youtube.com/view_play_lis...B74D020CFC7D34
Location: Hickory Flat, MS 38633 (redneck yee-haw)
Posts: 111
My VIN: 04875 4x4, 05538 sold in 2010,
Club(s): (SEDOC) (DCUK)
The current CarFax for Vin-4875
Location: Hickory Flat, MS 38633 (redneck yee-haw)
Posts: 111
My VIN: 04875 4x4, 05538 sold in 2010,
Club(s): (SEDOC) (DCUK)
Here is the DeLorean Bodytub that will be mounted onto the BroncoII 4x4 Frame:
Last edited by JoeyGowdy; 11-05-2011 at 04:10 PM.
Location: Hickory Flat, MS 38633 (redneck yee-haw)
Posts: 111
My VIN: 04875 4x4, 05538 sold in 2010,
Club(s): (SEDOC) (DCUK)
A peak underneath the tarp...
Location: Hickory Flat, MS 38633 (redneck yee-haw)
Posts: 111
My VIN: 04875 4x4, 05538 sold in 2010,
Club(s): (SEDOC) (DCUK)
Preparing to lift the 1988 BroncoII body from it's 2.9L v6 4x4 frame...
Location: Hickory Flat, MS 38633 (redneck yee-haw)
Posts: 111
My VIN: 04875 4x4, 05538 sold in 2010,
Club(s): (SEDOC) (DCUK)
That didn't work, time to bring in my heavy equipment...
Much better, me and my "heavy equipment" got 'er done...
I know, I know... video or it never happened... right?:
Last edited by JoeyGowdy; 11-05-2011 at 04:44 PM.
Location: Hickory Flat, MS 38633 (redneck yee-haw)
Posts: 111
My VIN: 04875 4x4, 05538 sold in 2010,
Club(s): (SEDOC) (DCUK)
The 1988 BroncoII 4x4 frame shortly after removing its body...
being pressure washed after letting the "Mary Wore Lye" soak for a couple hours...
WTF... a hovering DeLorean body tub?
NVM... it's just hanging out waiting for its frame to dry.
Last edited by JoeyGowdy; 11-05-2011 at 04:55 PM.
Location: Hickory Flat, MS 38633 (redneck yee-haw)
Posts: 111
My VIN: 04875 4x4, 05538 sold in 2010,
Club(s): (SEDOC) (DCUK)
Just hanging out, pre-fitting the body and frame... anyone seen my hand-held-grinder?
Did a little more eyeballing today...
Last edited by JoeyGowdy; 11-05-2011 at 05:01 PM.
Location: Hickory Flat, MS 38633 (redneck yee-haw)
Posts: 111
My VIN: 04875 4x4, 05538 sold in 2010,
Club(s): (SEDOC) (DCUK)
Then grabbed the jigsaw and made a new engine compartment...
Then removed a few things from the engine and lowered the DL body onto the B2 frame...
Last edited by JoeyGowdy; 11-05-2011 at 05:22 PM.
Location: Hickory Flat, MS 38633 (redneck yee-haw)
Posts: 111
My VIN: 04875 4x4, 05538 sold in 2010,
Club(s): (SEDOC) (DCUK)
A quick view around the redneck contraption...
Posting Permissions
