FRAMING JOHN DELOREAN - ON VOD www.framingjohndeloreanfilm.com
Page 3 of 3 FirstFirst 1 2 3
Results 21 to 22 of 22

Thread: Replacing the Frequency Valve and Return hoses

  1. #21
    Senior Member
    Join Date:  May 2011

    Posts:    194

    My VIN:    02855

    Club(s):   (NCDMC) (DCUK)

    if you install the fuel feed line for the frequency valve like this, the airbox will not set in place correctly. the line needs to be the other way or vertical. the airbox needs to sit down on the valve cover.


    image.jpg

  2. #22
    Senior Member DMC-81's Avatar
    Join Date:  Apr 2014

    Location:  Florida

    Posts:    2,251

    My VIN:    <2000

    Club(s):   (DCF)

    Quote Originally Posted by mark w View Post
    if you install the fuel feed line for the frequency valve like this, the airbox will not set in place correctly. the line needs to be the other way or vertical. the airbox needs to sit down on the valve cover.


    image.jpg
    Hi Mark, It worked for me. There was adequate clearance, at least for my completely stock set up.

    Dana

    1981 DeLorean DMC-12 (5 Speed, Gas Flap, Black Interior, Windshield Antenna, Dark Gray)
    Restored as "mostly correct, but with flaws corrected". Pictures and comments of my restoration are in the albums section on my profile.
    1985 Chevrolet Corvette, Z51, 4+3 manual
    2006 Dodge Magnum R/T (D/D)
    2010 Camaro SS (Transformers Edition)

Page 3 of 3 FirstFirst 1 2 3

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •