FRAMING JOHN DELOREAN - ON VOD www.framingjohndeloreanfilm.com
Page 2 of 2 FirstFirst 1 2
Results 11 to 12 of 12

Thread: Holley Sniper 2300 EFI kit?

  1. #11
    President, DeLorean Industries
    Join Date:  May 2011

    Location:  CLE/PHX

    Posts:    2,588

    My VIN:    5646,5080, 5880, 10234, 3639, 2518, 10586, 1538

    No problem. Base Holley hp/ dominator software is the same. Hp just doesn't have all the features enabled as with the better unit. Sniper and terminator have their own. I'll look and see if you can do the firmware add on. But it wouldn't matter as you said we both can do the math on the sizing issue. There is no way a prv will idle with that much injector flow. Best bet for diy owners is to build off megasquirt unless they want to pay for a professional package.
    www.deloreanindustries.com Every Detail Matters

  2. #12
    '82 T3 FABombjoy's Avatar
    Join Date:  May 2011

    Location:  Lansing, MI

    Posts:    1,168

    My VIN:    10270

    Quote Originally Posted by Delorean Industries View Post
    Holley does not support odd fire directly.
    Strange, really. I get that oddfire applications are limited but even dumbdumb MSD got it working on the 6AL boxes for ignition control!

    They took a fancy approach by adding the time between two pulses and dividing by two.

    Or they could just download the source code for msextra and look for inspiring algorithms.
    Luke S :: 10270 :: 82 Grey 5-Speed :: Single Watercooled T3 .60/.48 :: Borla Exhaust :: MSD Ignition :: MS3X Fully SFI Odd-fire EFI :: DevilsOwn Methanol Injection

Page 2 of 2 FirstFirst 1 2

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •