Two Complete Manual Transmission Setups

[RamblinDMC]

For sale are two complete manual transmission setups.
Basically everything you need for a manual swap except the pedal box, clutch master, and clutch line.
One is completely stock equipment.
Includes transmission, mounts, shift linkage, cross gate cable, shifter, flywheel, new clutch, pressure plate, throwout bearing, pilot bearing, clutch fork, and slave cylinder.
Transmission shifts well and everything works fine. All mounting hardware is included as well
The other setup (on the left) has been completely rebuilt with a bulletproof input shaft coupler from Nick Roedl. This setup includes a rebuilt shifter with a DPI stainless shift rod and weighted shift knob (not pictured.) Crossgate cable brackets at front of transmission are stainless from DPI and the shift linkage is a spherical bearing type of my own design. Also included is one of my stainless shift gates. This setup includes a practically new clutch that has only 2000 or so miles on it. I would like $5,000 for this setup. ($4k for the other)
Shipping/freight is available and will vary from 250 to 650 ish depending on distance from me. I'm in Farmington Michigan

Rebuilt/upgraded setup sold! Original setup up for grabs still

https://photos.app.goo.gl/zXnXC9eRCUbwf4jZ6

PHOTOS^

[RamblinDMC]

Upgraded setup sold!

Now I'm offering the other setup piecemealed out if anyone is interested. I'd sell the complete setup for 4k if anyone is interested. Everything you need for a manual swap except the pedal box, clutch hydraulic line and master. Prices for everything listed below. I'm negotiable if you purchase multiples!
Clutch/pressure plate/throwout bearing $175 (new unused)
Shift linkage/bellcrank $100
Crossgate $40
Clutch fork $40
Flywheel $400
Clutch slave cylinder $70
Trans mounts $120 ea
Trans mounting brackets $250 ea
Shifter $450 w/ knob
Transmission $2000

[RamblinDMC]

Transmission, shifter, and linkage sold.