FRAMING JOHN DELOREAN - ON VOD www.framingjohndeloreanfilm.com
Page 2 of 2 FirstFirst 1 2
Results 11 to 12 of 12

Thread: Seeking opinions about roof box/roof assembly replacement

  1. #11
    Senior Member
    Join Date:  May 2011

    Location:  Northern NJ

    Posts:    8,259

    My VIN:    10757 1st place Concourse 1998

    Depending on how the car was cared for and stored the roof box's condition can vary a lot. If the car was left outside and the outer door seals are bad, the box fills up with water and rots. If it is only surface rust (no actual holes) you can clean it up and paint it with POR 15 or equivalent. No way to spray or brush it so you use a rag and a wire or a stick and just slobber it all around. Before deciding what to do, an inspection is a good idea. It may not be as bad as you think or it could be a whole lot worse. It is worth trying to save it if you can, replacing it is a big job.
    David Teitelbaum

  2. #12
    DMC Timeless's Avatar
    Join Date:  Nov 2016

    Location:  SW FL

    Posts:    425

    Club(s):   (DCF) (DCO) (DCUK)

    You're repeating was has already been said. Time to stop DT.....
    ~LXA~
    Dunmurry | Stuttgart | Leipzig | Tochigi | Fremont | Bratislava | Sindelfingen | Kansas City | Oakville | Coventry

Page 2 of 2 FirstFirst 1 2

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •