Hey folks - doing front to back fuel refresh. Have new injectors and DPI lines in. Just drained the tank and getting ready to replace the OG unit for the Delphi FG0089. A few questions I need your expertise with:
1) The unit didn?t come with any ?quick connect? hose fittings. Do I need these and if so what part number did you use? FYI the top of this pump is the white plastic not metal, so not sure I want to crank down new 5/16 hoses direct to the pump top.
2) It came with a rubber ring/seal, but of course I?d need the V clamp correct? Which part do you recommend? EDIT: I just test fitted the rubber ring and it fits perfectly on the inside of the tank opening, maintaining a small lip at the top. It doesn?t come out and around the tank opening, if that makes sense.
3) Since this includes the sending unit, anyone know the wiring matchups I?d need to do to connect the pump harness to the car?s? I did see
this video, but they using the separate/OEM sender unit, so not soldering all the wires in the pump harness. BTW the pump harness I have has black, purple, grey and orange/black wires.
4) I was thinking of making my own cap for the now vacant sender hole at the top of the tank. Especially since I have the original screw on ring. Any risk with this or should I just buy a solid one?
Know that?s a pile of stuff but figure someone else has done this already.