looking for the door air vents. my are broken and keep falling down. Also would like a new or in good condition shift boot with the metal plate. Thanks
looking for the door air vents. my are broken and keep falling down. Also would like a new or in good condition shift boot with the metal plate. Thanks
PT
I don't want to hijack yr thread, my driver's side vent has a couple of broken flaps. I'm pretty sure these vents should be similar to another 70s-80s car. I can't put my finer on it, but there should be a compatible part we can use??
I know the new items (vents) are expensive from DMC.
Just had a quick poke around the net........
Our part
Mustang? Skinner, but looks very similar.
Location: Oslo, Norway
Posts: 34
My VIN: 1356
I bought my custom shift and ebrake boot here: http://redlinegoods.com/Deloreanshiftboot.shtm
Looks like this, but with non perforated leather
Thanks I'll look into the shift boot. Does it come with metal bracket? My old boot I have to hold it down on all 4 coners with black screws.
The air vents I'm still looking around for something similar.
PT
Location: Oslo, Norway
Posts: 34
My VIN: 1356
Here is how to install it, it comes without the bracket so you have to reuse the old one.
http://redlinegoods.com/Deloreaninstall.shtm
Location: Renton, WA
Posts: 342
My VIN: 02261
Club(s): (PNDC)
Noooooo! Don’t buy any products from Redline Goods!
Here is a picture of the black leather shift boot and the black leather parking brake handle boot I bought from Redline Goods.
As you can see they did not bother to sew the end of the leather boot to match the pictures they have on their web site.
The leather products come from
REDLINEGOODS
Skn Poczt. Nr 71
81-209 Gdynia 9
POLAND
I would never ever buy any products from them.
They can’t even get the manufacture of the DMC-12 correct. They have it listed as GMC instead of what we all know is the correct manufacture.
Buyer Beware.
Mark Vanyo
Links to DeLorean related web sites!
http://dmctalk.org/showthread.php?19...s-Part-I-of-II.
Location: Oslo, Norway
Posts: 34
My VIN: 1356
Thanks, didn't mean to recommend a bad product. Now looking at mine it's true, it's not like the picture online, I'll send them an email and ask.
I have barely taken them out of the envolope it came in since my car isn't arriving before early December.
Edit: I'll take some pictures when I've fitted them, and I'll report back their answer is and if I get new ones made.
Last edited by aryx; 10-26-2011 at 12:04 PM.
Location: Oslo, Norway
Posts: 34
My VIN: 1356
Here is the answer I got, won't be able to test it before I get the car.
Hello!
The shift boot doesn't have one, here's how you install it: http://www.redlinegoods.com/ziptie.jpg
Same with the ebrake boot, infact. Just flip it inside out and use a zip-tie to secure it to the shifter/ebrake handle.
Thank you, I think Im going to get the one from delorean.com
PT