FRAMING JOHN DELOREAN - ON VOD www.framingjohndeloreanfilm.com
Results 1 to 9 of 9

Thread: DeLorean for physics simulation.

  1. #1
    zgush
    Join Date:  May 2024

    Posts:    8

    DeLorean for physics simulation.

    Hi guys. Thanks for letting me in.

    I'm collecting info about the DeLorean car for a hobby project. physics simulation and studying dmc-12
    I started this project several weeks ago, but somehow now I feel more like an archeologist digging for any good evedences of the car )

    Thanks to the internet, the people here, and the resources you've shared, I've already done some part

    current iteration state
    Frame_2024-06-10.jpg
    https://drive.google.com/file/d/1d_k...ew?usp=sharing

    For now most of the suspension part dimensions are approximated, so they accumulate error if use them to other approximations,
    which I'm trying to eliminate updating geometry if some new data found.
    so looking for any help I can find
    Last edited by zgshnk; 06-10-2024 at 04:17 AM.

  2. #2
    zgush
    Join Date:  May 2024

    Posts:    8

    now I'm iterating with suspension geometry, wheels-to-frame positioning, links length and placement and so on.
    I would be realy greatful if you can provide me with at least some of these metrics please.

    Rear Knuckle
    https://cdn.discordapp.com/attachmen...7b59e3b68e421&

    Front Knuckle
    https://cdn.discordapp.com/attachmen...bfb9c33ca6e67&

    Front Upper Arm
    https://cdn.discordapp.com/attachmen...af430c0f0bd42&

    You are my only hope! )
    zgush

  3. #3
    Guy with a DeLorean Mark D's Avatar
    Join Date:  May 2011

    Location:  Stevens Point,WI

    Posts:    2,475

    My VIN:    6125

    Have you seen this thread? I'm not sure if the 3D PDF file linked there is still available, but I believe you could take some measurements off of it and get the dimensions you were looking for.

    https://dmctalk.org/showthread.php?1...D-model-in-PDF

    EDIT:

    Looks like that model is for the frame only, and does not include the suspension. Might still be helpful though.
    Last edited by Mark D; 06-10-2024 at 10:42 AM.

  4. #4
    zgush
    Join Date:  May 2024

    Posts:    8

    thanks, Mark!
    of course this Rhye's PDF is super helpful.

    and now I need add suspension )

    then as a next step acollect suspension parts weight information..
    I guess I'll post here and keep updated a full list of required measurements.
    zgush

  5. #5
    zgush
    Join Date:  May 2024

    Posts:    8

    Dimensions
    1. Front / Rear static Toe, Camber
    2. Front UCA
    3. Front LCA (have)
    4. Rear upper link (have)
    5. Rear lower link (have)
    6. Rear Trailing Arm
    7. Rear knuckle (have)
    8. Front knuckle (have)
    9. Tie rod

    Weight / Mass
    (best: part photo + weight)

    Level Marty:
    1. Front / Rear wheel: rim, tire (any assembly)
    2. Front LCA (any assembly)
    3. Front UCA (any assembly)
    4. Rear Upper / Lower link (any assembly)
    5. Rear trail arm (any assembly)
    6. Front / Rear Hub: knuckle, brakes, links, ball joint, bolts, bearing (any assembly)
    7. Front / Rear Brakes (any assembly)
    8. any bushing

    Level Doc Brown:
    9. Frame weight
    10. Car body weight
    11. Fuel tank weight

    Level Hulk:
    12. Frame torsional stiffness
    13. Car torsional stiffness

    Thanks.
    After processing I can share all provided data with the community.
    zgush

  6. #6
    zgush
    Join Date:  May 2024

    Posts:    8

    zgush

  7. #7
    zgush
    Join Date:  May 2024

    Posts:    8

    zgush

  8. #8
    zgush
    Join Date:  May 2024

    Posts:    8

    Now I have most of the geometry I need.

    And I reall y need mass data.

    1. Front wheel
    2. Rear wheel

    How much do they weight?
    zgush

  9. #9
    zgush
    Join Date:  May 2024

    Posts:    8

    Screenshot_2024-06-12_201649_to_delete.jpg
    native images upload test
    zgush

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •