Accumulator to filter hard line alternative needed

[Paulswpc]

There have been some discussions over the years about an alternative to the hard line (braided flex??) from the accumulator to the filter. Swapping this out is usually needed when a seized fitting which is also leaking, can not be removed. Unfortunately, the replacements produced back then are no longer manufactured. Is there a current solution available from either the big vendors or smaller shops that can make and ship to us? I?d rather have a tried & trued part since this is basically a flammable area of concern. Not someone using a hammer and a vice in the basement to fabricate the solution. Thanks!

[82DMC12]

There have been some discussions over the years about an alternative to the hard line (braided flex??) from the accumulator to the filter. Swapping this out is usually needed when a seized fitting which is also leaking, can not be removed. Unfortunately, the replacements produced back then are no longer manufactured. Is there a current solution available from either the big vendors or smaller shops that can make and ship to us? I?d rather have a tried & trued part since this is basically a flammable area of concern. Not someone using a hammer and a vice in the basement to fabricate the solution. Thanks!

I bought this part from DMC Midwest a few years ago but not sure if they are still into outside parts sales. I would think all vendors are aware of the issue and have some sort of solution.

[r00b]

I've been wanting to make some quick connect fittings that fit onto the accumulator, then replace the hard line completely with a nylon hose all the way to the quick connect fitting on my fuel filter.