What have you done to your DeLorean today?

[82DMC12]

Yes it is a kit all the lines fittings and junctions to do the whole system from the master to the calipers

Sent from my Pixel 9 Pro XL using Tapatalk

I have the same kit. Sure looks slick and it's easy to install. However a couple years later I remain somewhat unconvinced that you get the same brake pressure with this system as opposed to mostly hard lines. I would like to do some A-B testing with another car side by side and see what the emergency brake stop distance is from say 60-0.

Also, I see you clipped the front main line that goes to the rear of the car in the same location that the factory tube went. You might want to rethink that since you'll never be able to remove it once the body is back on the frame. I ran mine along with the clutch line on the lower edge of the frame so that I can service it in the future.

[JBaker4981]

Removed the cowl to clean 43 years of dirt under there and install some stainless mesh for the HVAC air intake. Also replaced the fender edge trim that was also 43 years old and rock hard. This product works perfect and matches OE - at least what was on my car.

https://www.amazon.com/dp/B09NVHTQR3...sin_title&th=1

THIS was the find of the month dude. I picked up 50ft of it and rolled it on easily after I cleaned up silicone from the PO on the RFF. Looks beautiful and no longer rock hard either

[seventy4burban]

Tried to tie up some loose ends....looking like the soonest I could mate the frame would be Monday/Tuesday but I'm not confident after the issue today. Anyways it's soooo close

Sent from my Pixel 9 Pro XL using Tapatalk

[Timeless]

THIS was the find of the month dude. I picked up 50ft of it and rolled it on easily after I cleaned up silicone from the PO on the RFF. Looks beautiful and no longer rock hard either

Thanks! I get excited about the little details and that's what makes a stellar final product. For certain things I'll research as needed and share with the community. Glad I could help.

[Timeless]

Custom leather e-brake handle utilizing original factory leather from the seat backs.
e-brake (1).jpge-brake (2).jpg

[JohnZ]

Cleaned the engine bay fiberglass with tons of WD-40, as my friend and previous owner Jason Sharkey from Indiana once suggested me to do! And it worked flawlessly! It took all the dirt away, all the dust and stuff... now everything is much cleaner! Also, I did some paint touch ups on the fuel distributor... lately replacing the fuel lines made some rusty spots appear due to fuel spilling out! Now it's fine again

IMG_20250525_121921082.jpg

IMG_20250525_104809796_MP.jpg

[JBaker4981]

Last weekend, 27 of us met up in Louisville, Kentucky for a weekend of Bourbon tours, bars, good food, and laughs.

Enjoy 500+ photos with special guest Zach DeLorean

https://tn-dmc.com/photos%3A-bourbon-trail-25

[82DMC12]

Last weekend, 27 of us met up in Louisville, Kentucky for a weekend of Bourbon tours, bars, good food, and laughs.

Enjoy 500+ photos with special guest Zach DeLorean

https://tn-dmc.com/photos%3A-bourbon-trail-25

That was a hell of a weekend! It was a 1300 mile round trip for me. Thanks for posting the pics!

Sent from my Pixel 6a using Tapatalk

[82DMC12]

Last weekend, 27 of us met up in Louisville, Kentucky for a weekend of Bourbon tours, bars, good food, and laughs.

Enjoy 500+ photos with special guest Zach DeLorean

https://tn-dmc.com/photos%3A-bourbon-trail-25

Almost forgot, here are a few drone shots from Saturday night!

Sent from my Pixel 6a using Tapatalk

[JETS 81 DMC]

Thanks for sharing the pics.

Enjoyed them and sure looks like an awesome time was had.