FRAMING JOHN DELOREAN - ON VOD www.framingjohndeloreanfilm.com
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 12

Thread: Toby's sway bar kit.

  1. #1
    Junior Member Martyn's Avatar
    Join Date:  Mar 2012

    Location:  Hastings, ����

    Posts:    27

    My VIN:    Ex vin 6064

    Club(s):   (DCH)

    Toby's sway bar kit.

    Anyone looking too change their anti roll bar and lower control arm bushes,I would highley reccomend Toby's sway bar kit.A big .

  2. #2
    Senior Member Jeff K's Avatar
    Join Date:  Jun 2011

    Location:  Woodland Hills, CA

    Posts:    502

    My VIN:    16245

    Quote Originally Posted by Martyn View Post
    Anyone looking too change their anti roll bar and lower control arm bushes,I would highley reccomend Toby's sway bar kit.A big .
    Good to know. I bought it and plan on installing it this week.
    Q: How do you make a small fortune restoring a DeLorean?
    A: Start out with a large fortune!

    Vin 16245 (83, 5sp Blk) aka Stinky

  3. #3
    Senior Member Kevin's Avatar
    Join Date:  May 2011

    Location:  Blacksburg, VA

    Posts:    231

    My VIN:    3472 (former)

    Club(s):   (DCVA) (DCUK)

    Someone else was raving about it at DCS this weekend as well, I'll have to give it a try. How has your handling improved? I think mine could use some improvements cornering, so I'm mainly looking for that.

  4. #4
    Junior Member Martyn's Avatar
    Join Date:  Mar 2012

    Location:  Hastings, ����

    Posts:    27

    My VIN:    Ex vin 6064

    Club(s):   (DCH)

    Really mate I would change the lot.
    The steering is much firmer,it brakes in a strait line,it got rid of the shake i had on the steering wheel when breaking.
    I can throw it into corners on my local roads I couldn't before.
    Just the over all feel of the car is much firmer.Feels loads more solid.
    But I also have poly trailing arm bushes as well.

  5. #5
    Tweedledumber DCUK Martin's Avatar
    Join Date:  May 2011

    Location:  DeLorean Cars, UK

    Posts:    592

    I've been a huge advocate of this bush kit for years. Anyone considering spending hundreds of dollars on the reinforcement brackets from Ed should consider 99 bucks on this and see if you still think you need an improvement...
    Martin Gutkowski
    -------------
    Very part time DeLoreaner...

  6. #6
    Senior Member DMC5180's Avatar
    Join Date:  May 2011

    Location:  Reedsburg, WI

    Posts:    4,026

    My VIN:    5180

    Club(s):   (DMWC) (DCUK)

    I can answer that.

    I did Toby's ARB kit first, some handling improvement was noted at the time plus it got rid of all my annoying front end squeaks (donut bushings mostly) that was the biggest improvement to me.

    6 months later I installed ED's LCA stabilizer arms. Those made a significant improvement reducing bump steer feed back in the steering wheel in addition to the poly ARB kit.

    Some claim the strut bars make a noticeable difference. I don't have one on my car to say one way or the other. Personally I'm skeptical until proven otherwise. But if all you have is a strut bar with a stock front end I can see where a person could notice a difference. What that difference is versus the improvements I've already made is what I'm in question of.
    DENNIS

    VIN 5180, Frame 3652, STAGE II​, DM-eng Solid State Solutions (RPM Rly, Dm.Lt.Mod., Fan Fail Mod. , FAN Rly, HS.Rly) , HID headlights, SPAX user since 2009, Eibach springs, M Adj. Rear LCA's, DPNW poly-sway bar kit, DMCEU LCA Stabilizer link kit, DMCMW Illuminated door sills, Aussie Illuminated SS Shifter plate, REAL MOMO EVO Steering wheel, DELOREANA Extended View Side Mirrors w/ Heaters, DELOREANA LED Door Lights.

  7. #7
    Senior Member 1batt4u's Avatar
    Join Date:  May 2011

    Location:  Queens, NY

    Posts:    1,306

    My VIN:    2964

    Any pictures???
    Billy C. VIN: 2964

    "Trying to Live the Dream!"

    "If you're gonna own a DeLorean, why not build it with some style?"

    http://www.facebook.com/billy.chingas.7

  8. #8
    Senior Member GS450-Junkie's Avatar
    Join Date:  May 2011

    Location:  Mosinee, Wis.

    Posts:    632

    My VIN:    00778 and Formerly 06770.

    How much will a good front end suspension upgrade cost you in the end?

  9. #9
    Senior Member DMC5180's Avatar
    Join Date:  May 2011

    Location:  Reedsburg, WI

    Posts:    4,026

    My VIN:    5180

    Club(s):   (DMWC) (DCUK)

    Quote Originally Posted by GS450-Junkie View Post
    How much will a good front end suspension upgrade cost you in the end?
    It depends on your definition of GOOD.

    Assuming you are doing the work, it's a matter of Parts cost and what your willing to spend.

    The list of upgrade parts:

    DMCMW Strut Bar about $175
    DMCNW Poly ARB bushing kit is about $100
    DMCEU Poly ARB Bushing kit Is about the same. (Avail @ DMCMW)
    DMCEU LCA link kit is about $375 (Avail @ DMCMW)


    Then you have Normal Parts that might need replacing.

    Ball joints, Steering rack, steering shafts, shocks.
    DENNIS

    VIN 5180, Frame 3652, STAGE II​, DM-eng Solid State Solutions (RPM Rly, Dm.Lt.Mod., Fan Fail Mod. , FAN Rly, HS.Rly) , HID headlights, SPAX user since 2009, Eibach springs, M Adj. Rear LCA's, DPNW poly-sway bar kit, DMCEU LCA Stabilizer link kit, DMCMW Illuminated door sills, Aussie Illuminated SS Shifter plate, REAL MOMO EVO Steering wheel, DELOREANA Extended View Side Mirrors w/ Heaters, DELOREANA LED Door Lights.

  10. #10
    DeLorean Driver
    Join Date:  May 2011

    Location:  Reading PA

    Posts:    335

    My VIN:    2638

    this part currently lists at DMCNW as out of stock...
    Still rocking the Ducellier

Page 1 of 2 1 2 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •