FRAMING JOHN DELOREAN - ON VOD
www.framingjohndeloreanfilm.com
-
Builder of the first Delorean Time Machine

Originally Posted by
Dracula
You have yourself said, in this thread and other places, that you aren't undoing the conversion, so that only further proves my point. You had initially stated that was your intent, now you list a series of reasons that you decided against it. Since that disagrees with my ideas of automotive restoration and alteration, it will always be a point of contention.
When I bought the car, I wasn't sure what I was going to do with it. I decided that it's more cost effective to go forward than to go backward. Either way, I'm working my ass off making sure it is 100% mechanically sound and safe. I'm doing a frame off. This is more attention than this car has had, probably since it's construction.
It's the antagonizing comments like your joke about converting a Bricklin or comparison of myself to DeLorean One that are needlessly added for, what I assume to be the sake of fueling a conflict.
It's called humor. I am jealous of your Bricklin. I'd love to see one in person some day. I'd never even heard of them until after owning a Delorean for a while. The "Delorean One" comment was related to what I perceive as an elitist attitude.
I understand that most people have the movie as their first form of exposure and that can't be helped. However, I've seen too many nice cars turned into sub-par replicas and the worst is when a car that could've been slowly fixed on even a limited budget becomes modified into a half-baked representation of the movie car. I don't buy a car that I can't budget a restoration for and treat with care. If I can't maintain it, I won't buy it. Too many people buy cars they can't afford to repair or maintain, and this is not exclusive to DeLoreans, and then let the car deteriorate because they can't get their money out of it or afford to fix it. People need to assess their finances before they purchase any classic vehicle, let alone two.
I could completely put 2930 back to stock, and then sell it for a hefty profit. I would then have nothing but a little bit of money in my pocket, and have lost a huge chunk of my life for it. I chose instead to do what I wanted to do with it, and to have something I can enjoy.
I can afford to own both cars or I wouldn't have bought them. If my choices for 2930 were to either return it to stock or part it out, it would actually be more cost effective for me to part it out. Would you prefer that? I chose the third option, of restoring it as I can, and making it a movie car, as it's a poor candidate for stock restoration.
Back To The Future will always be linked with these cars. If no more movie cars were made, 50 years from now, someone will still see a Delorean and yell "BACK TO THE FUTURE!". Embrace it, or it'll drive you insane.
It's not like there are thousands for replica cars out there. In the end, a car is a car. As cars go, I'd argue a Delorean isn't even all that rare. If I can perpetually find at least 5 for sale on ebay, I consider that to be proof that they are not that rare.
--buddy
-
Formerly tmatalas

Originally Posted by
nullset
Back To The Future will always be linked with these cars. If no more movie cars were made, 50 years from now, someone will still see a Delorean and yell "BACK TO THE FUTURE!". Embrace it, or it'll drive you insane.
Word.
-
Senior Member

Originally Posted by
tmatalas
Word.
+1 to this.
-
Interesting....
I have known Gary for a number of years and have DIRECT dealings with him. His parts are second to none. He has worked many hours on some of these parts just to be copied and slandered for obvious monetary reasons. I never speak up to much on these boards because of the politics. I simply want to enjoy my Delorean. Gary is my friend and I felt that I needed to clear the air the best that I could.
The Terry story.....well there are two sides to every coin. I find it awfully convenient that "Temporal Effects" opens up and Gary, who is considered to be the best at what he does by many "non-BTTF vendors" is openly slammed with all this "evidence" from members of a certain club in California that certain members are now selling cars publicly. I have seen the e-mails from Terry and KNOW for a FACT that much more was promised for Terry’s conversion and he was aware of a lot of the issues that were mentioned above. 100% of the libelous accusations can all be explained to a reasonable person that is not caught up in the ‘we are better’ game. I mean if you want to get down to “damaged parts” how bout all of the drilled fenders and quarter panels and that have to be done to make a BTTF conversion. C’mon get a life. These cars have to be modified from an original Delorean’s state to make these BTTF cars. All of the modifications were done with Terry’s consent and knowledge. I have SEEN the e-mail’s with my OWN eyes. Gary is the victim on this deal. He simply wasn’t paid what he was promised. I am sure you have checks that were cashed but c’mon man you know what your end of the bargain was. If you have a problem with the hood you should PM Gary…I know he will trade your back. He has told me on many occasions on how he wished he had it back to be screen accurate. I can honestly tell you he cares nothing about a “flap” hood. And a lot of the parts you had fixed could have been replaced if you would have simply asked before you got in bed with some other BTTF group…..Even though you gave your blessing on the modifications.
Gary has never STOLEN BTTF props off of a screen used car like "some" people have and admitted to it. And praising themselves for their actions! Again…..I have seen the evidence.
Gary is not part of a big faction or group. Some of the bullies need to get a life and stop playing the 'mine is better' game just to market their cars better when they sell them for insane amounts of money.
Just think about it...If you are going to start selling BTTF cars wouldn't you want to be perceived as the "best". Yes is the answer. But to many that would not mean creating libel against another person. Defamation of character is a very serious action that can have very serious consequences.
I know "hundreds of thousands" is an inaccurate number for what he has made. I know his profit margins are extremely small after you factor in car cost and parts for the conversion and in my opinion too little for all of the negativity towards him over a group of people only interested in promoting themselves as the "best" to make a few dollars.
Video Bob---C’mon man. Just because he has kicked you off his boards and refuses to sell you parts because you just get other peoples work and then market them as your “own” and as the “best”, is that a reason to jump on the wagon when there is not a person that I know in the Delorean community that doesn’t roll their eyes when your name is mentioned.
Adam Lee
-
Nothing witty here lest it offend

Originally Posted by
delorean85
Defamation of character is a very serious action that can have very serious consequences.
Not hardly ever, actually.
-
Formerly tmatalas

Originally Posted by
delorean85
The Terry story.....well there are two sides to every coin. I find it awfully convenient that "Temporal Effects" opens up and Gary, who is considered to be the best at what he does by many "non-BTTF vendors" is openly slammed with all this "evidence" from members of a certain club in California that certain members are now selling cars publicly. I have seen the e-mails from Terry and KNOW for a FACT that much more was promised for Terry’s conversion and he was aware of a lot of the issues that were mentioned above. 100% of the libelous accusations can all be explained to a reasonable person that is not caught up in the ‘we are better’ game. I mean if you want to get down to “damaged parts” how bout all of the drilled fenders and quarter panels and that have to be done to make a BTTF conversion. C’mon get a life. These cars have to be modified from an original Delorean’s state to make these BTTF cars. All of the modifications were done with Terry’s consent and knowledge. I have SEEN the e-mail’s with my OWN eyes. Gary is the victim on this deal. He simply wasn’t paid what he was promised. I am sure you have checks that were cashed but c’mon man you know what your end of the bargain was. If you have a problem with the hood you should PM Gary…I know he will trade your back. He has told me on many occasions on how he wished he had it back to be screen accurate. I can honestly tell you he cares nothing about a “flap” hood. And a lot of the parts you had fixed could have been replaced if you would have simply asked before you got in bed with some other BTTF group…..Even though you gave your blessing on the modifications.
Adam Lee
Well written, Gary! I mean, Adam! Or is it Tom?
I'm happy to provide anyone who cares to know with more detailed information on this particular transaction including emails, video footage, and eye witness accounts. However, I have no interest in continuing this back and forth here on DMCTALK as... I'm sure... no one is interested. I'm hoping the admins here delete this thread.
Aren't "sock puppets" not allowed here on DMCTALK?
-
"Adam Lee"?
Never heard of ya.
Funny how Gary uses the word "Interesting" so much a joke-shirt was made about it!
Adam, unless you have met me or done business with me personally, anything you know about me that was fed to you via Gary is most likely bullshit.
I'm a good dude, with good friends, who does good work, who gets great compliments from the people who know what's what and that's all that really matters.
The guy who ended up buying my car at Auction Kings got my name as a recommendation directly from Bob Gale.
Kevin Pike helped me with the project, invited me to stay at his house and pronounced my car "The best replica he has ever seen".
So who's opinion is more valid?
The guy who wrote the movie and the guy who built the original car, or
some poindexter in small town Oklahoma who's pissed because he got beat
in the "who's got the better nerdy car" competition?
Gary the Weave, = Owned.
-
Buddy, I used to give away the dimensions and CAD's of the vents on my website but I admit that I don't do that anymore.
I got sick of giving away all my secrets and creating my own competition.
I no longer give that stuff away nor do I sell it.
I only sell complete replicas.
You could do what I did...get in your car with a camera and a ruler, drive to Universal Studios, pay off a maintenance worker, gain access to the car, measure all the parts and pieces, stay in hotels and run up a bill for a few thousand bucks, spend about 8 years meticulously going through photos, watching the videos, taking screen shots, having scaled up prints made, making templates out of foam board and MDF and working with CAD engineers and metal shops to help you make them....spend about $3000 on that project, put a few together and see how you like them and how they fit, try it again and again....
Did I mention the Plasma cutters? TIG Welders? Brake & Shear?
... and all those little machine screws....damn.
Oh wait, you want someone to just hand all that stuff over to you for FREE!!!
That would be awesome!!!!
It took me 8 years of full blown solid work to get where I'm at today.
No one said this was easy dude.
So in my opinion, if someone offers to SELL you all that for a small price I would jump all over that without a complaint!!!
- VB

Originally Posted by
nullset
I asked for help with the dimensions on the rear deck vents, and was told to "wait for metal madness 2". No other information was offered.
I don't want to buy vents. Not from Gary, Videobob, or anyone else. I want to make them. That's what I was asking for help with.
"Wait for us to make them so you can buy them" is not a helpful response.
--buddy
-

Originally Posted by
videobob
So who's opinion is more valid?
The guy who wrote the movie and the guy who built the original car, or
some poindexter in small town Oklahoma who's pissed because he got beat
in the "who's got the better nerdy car" competition?
Awesome.
-
Builder of the first Delorean Time Machine

Originally Posted by
videobob
You could do what I did...get in your car with a camera and a ruler, drive to Universal Studios, pay off a maintenance worker, gain access to the car, measure all the parts and pieces, stay in hotels and run up a bill for a few thousand bucks, spend about 8 years meticulously going through photos, watching the videos, taking screen shots, having scaled up prints made, making templates out of foam board and MDF and working with CAD engineers and metal shops to help you make them....spend about $3000 on that project, put a few together and see how you like them and how they fit, try it again and again....
Did I mention the Plasma cutters? TIG Welders? Brake & Shear?
... and all those little machine screws....damn.
Oh wait, you want someone to just hand all that stuff over to you for FREE!!!
That would be awesome!!!!
It took me 8 years of full blown solid work to get where I'm at today.
No one said this was easy dude.
So in my opinion, if someone offers to SELL you all that for a small price I would jump all over that without a complaint!!!
- VB
I'd rather not recreate the wheel. If someone has gone to all that effort, I'd much prefer asking them for help to doing it myself. That way, I can focus on other things. I have some skills others might not have. Others have some information I don't have.
So yes, I'm going to ask for information wherever I can get it. And you're welcome to hoard whatever you want, and share what you want.
What I'm looking for is COOPERATION, which seems not to exist within the BTTF builder's community.
So far, Gary's website is the only place to actually show reference material, so I'll absorb as much as I can. If I manage to come up with something reasonable, I'll be releasing the plans so others can use them. Why? Because this is a hobby, not my livelihood. It's FUN.
--buddy
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules