FRAMING JOHN DELOREAN - ON VOD www.framingjohndeloreanfilm.com
Page 45 of 111 FirstFirst ... 35 43 44 45 46 47 55 95 ... LastLast
Results 441 to 450 of 1102

Thread: Farrar's car blog

  1. #441
    Owner since 2007 Farrar's Avatar
    Join Date:  May 2011

    Location:  Fort Lauderdale

    Posts:    4,740

    My VIN:    02613

    Club(s):   (DCF)

    Quote Originally Posted by content22207 View Post
    It's the vacuum operated valve on the transmission that keeps it from shifting like a 1952 Mack truck -- the other 3/16" line off the back of your manifold.
    Okay, thanks! Yup, I checked that yesterday and it's good.

    Perhaps I should replace all vacuum lines with silicone for my own peace of mind.

    Of course, if I spend money on expensive hoses, I am sure something else will break.

    Hm, decisions, decisions...

    Farrar
    3.0L, automatic, carbureted

  2. #442
    Banned
    Join Date:  Jun 2011

    Posts:    1,068

    Buy a $3.99 assortment of vacuum plugs instead. They will do everything you need until this idle situation is sorted out.

    You won't need any of the 1/4" plugs -- stick them on your courtesy light door plungers.

    Bill Robertson
    #5939

  3. #443
    Owner since 2007 Farrar's Avatar
    Join Date:  May 2011

    Location:  Fort Lauderdale

    Posts:    4,740

    My VIN:    02613

    Club(s):   (DCF)

    Quote Originally Posted by content22207 View Post
    Check ignition with a timing light. If it flashes consistently on each spark plug, they are fine.
    Fortunately, I've done that already. I get even, regular flashes on each wire right above the plug.

    Quote Originally Posted by content22207 View Post
    Buy a $3.99 assortment of vacuum plugs instead. They will do everything you need until this idle situation is sorted out.
    I will try blocking off all of the vacuum ports next. I actually thought of doing that last night while chewing the matter over with a bandmate of mine* at a photo-shoot, but I was busy (as I was tonight, and will be tomorrow night).

    If I decide like punishing myself, or can bathe in DEET, or get someone to hold an umbrella over me while I work, or all three, I might try the vacuum cap method this weekend.

    Farrar

    --
    *Interesting fellow -- he told me of a '72 Buick he once had which had developed a crack in the carburetor so small that he couldn't see it. Symptoms: every time it rained, the car would die, but when it dried up again, the car would start and run fine again -- until, of course, the next time it rained. He told me he eventually covered the entire thing in JB Weld. (The carburetor was craptastic, anyway.)
    3.0L, automatic, carbureted

  4. #444
    Owner since 2007 Farrar's Avatar
    Join Date:  May 2011

    Location:  Fort Lauderdale

    Posts:    4,740

    My VIN:    02613

    Club(s):   (DCF)

    Quote Originally Posted by Ron View Post
    With all that has been going on, a quick look at a the plugs might not be a bad idea..
    The plugs have less than ten minutes of use; I doubt I can glean anything from them.

    Farrar
    3.0L, automatic, carbureted

  5. #445
    Banned
    Join Date:  May 2011

    Location:  Baton Rouge, Louisiana

    Posts:    3,047

    My VIN:    16510 and carbureted

    Club(s):   (GCD) (SEDOC) (DCUK)

    Quote Originally Posted by Farrar View Post
    The plugs have less than ten minutes of use; I doubt I can glean anything from them.

    Farrar
    This is highly unlikely but maybe his plugs are defective or aren't gapped properly. Was it idling like crap before you replaced them?

  6. #446
    Owner since 2007 Farrar's Avatar
    Join Date:  May 2011

    Location:  Fort Lauderdale

    Posts:    4,740

    My VIN:    02613

    Club(s):   (DCF)

    Quote Originally Posted by stevedmc View Post
    Was it idling like crap before you replaced them?
    Yep. But I noticed the plugs on the left were really dark, so I replaced them all and re-adjusted the idle air mixture screws so that the fuel flow would be balanced side-to-side.

    Edit: FWIW, they're plain old Autolite 103 plugs; nothing special about them. I gapped them at .044"

    Farrar
    3.0L, automatic, carbureted

  7. #447
    Banned
    Join Date:  May 2011

    Location:  Baton Rouge, Louisiana

    Posts:    3,047

    My VIN:    16510 and carbureted

    Club(s):   (GCD) (SEDOC) (DCUK)

    Quote Originally Posted by Farrar View Post
    Yep. But I noticed the plugs on the left were really dark, so I replaced them all and re-adjusted the idle air mixture screws so that the fuel flow would be balanced side-to-side.

    Edit: FWIW, they're plain old Autolite 103 plugs; nothing special about them. I gapped them at .044"

    Farrar
    Did you ever figure out why there was coolant in the air filter housing? I can do a combustion test for you next time we are around each other. If you have a head gasket leak, that could be the very reason you are having idle problems.

    When I had my head gasket leak I had to run a higher octane gas otherwise the engine would knock.

    EDIT: Were any of your plugs wet?

  8. #448
    Not dead yet, also Admin. sean's Avatar
    Join Date:  May 2011

    Location:  Dahlonega GA

    Posts:    2,462

    Club(s):   (SEDOC) (DCUK)

    Quote Originally Posted by Farrar View Post

    Edit: FWIW, they're plain old Autolite 103 plugs; nothing special about them. I gapped them at .044"
    Any reason you went with Autolite? I've never had success with them, ngk's or single prong platinum Bosch. I've always used Bosch silver or +4's and the best results with them. I may be treading "which oil is best" territory but just thought I'd ask.
    eBay selling at it's best I can tell you stock Delorians and quite a bit of slugs so the Turbo is a super nice up-grade.
    K-Jet: Causing electrical issues since November 5th 1955

  9. #449
    Owner since 2007 Farrar's Avatar
    Join Date:  May 2011

    Location:  Fort Lauderdale

    Posts:    4,740

    My VIN:    02613

    Club(s):   (DCF)

    Quote Originally Posted by sean View Post
    Any reason you went with Autolite?
    Same brand I had last time. Prior to that, I had something different, but couldn't recall the brand, but I know it wasn't Bosch, NGK, Champion, or anything else fancy/foreign -- my car has always run on ordinary copper-core spark plugs.

    Farrar
    3.0L, automatic, carbureted

  10. #450
    Banned
    Join Date:  Jun 2011

    Posts:    1,068

    Multi electrode plugs can't be regapped.

    It's not as though you get 4 sparks with 4 electrodes. As soon as spark jumps one of the electrodes, that's it -- you won't get any others.

    The reason you may be having better success with them is because they come gapped very small, which is right up Bosch ignition's alley (Bosch coils can not jump common breakerless plug gaps -- they are limited to small plug gaps).

    Bill Robertson
    #5939

Page 45 of 111 FirstFirst ... 35 43 44 45 46 47 55 95 ... LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •