FRAMING JOHN DELOREAN - ON VOD www.framingjohndeloreanfilm.com
Page 2 of 2 FirstFirst 1 2
Results 11 to 14 of 14

Thread: Fuel Gauge needle pointing south no matter what

  1. #11
    EFI'd dn010's Avatar
    Join Date:  Jul 2011

    Location:  Florida: Pinellas County

    Posts:    2,395

    My VIN:    5003 Never placed Concourse 2002-Current

    Club(s):   (DCF)

    FYI, I’ve only installed pins on Fuel, Oil and Temp gauges. The rest do not need it.

    Quote Originally Posted by DMC-Ron View Post
    Thanks for the response and the photo. This is very helpful.
    Ron



    Sent from my iPhone using Tapatalk
    -----Dan B.

  2. #12
    Member Chris_Von_Bron's Avatar
    Join Date:  May 2011

    Posts:    77

    My VIN:    05255

    Fuel gauge is pointing down no matter what



    Through the testing (as per the video I've just uploaded via the thumbnail above) I was able to confirm the issue wasn't the wiring or sender....

    I hope this helps anyone else in the same scenario!

  3. #13
    Senior Member
    Join Date:  Nov 2022

    Posts:    150

    My VIN:    7012

    Just adding another instance of a needle pointing dead south (6:00) and a few light raps on the binnacle got it moving again.

  4. #14
    EFI'd dn010's Avatar
    Join Date:  Jul 2011

    Location:  Florida: Pinellas County

    Posts:    2,395

    My VIN:    5003 Never placed Concourse 2002-Current

    Club(s):   (DCF)

    I know this thread is old but I have been asked by a few people if I could direct them to the photos of the needles I did for my gauges. I couldn't find what happened to the photos in my original post, so here are some new ones. Judging by the flat side of the pin, it looks like I cut down a small cotter pin for this. Sorry the one image is rotated, I'm not sure how to fix that.

    IMG_5994.jpg

    IMG_5990.jpg
    Last edited by dn010; 09-18-2026 at 09:33 AM.
    -----Dan B.

Page 2 of 2 FirstFirst 1 2

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •