FRAMING JOHN DELOREAN - ON VOD www.framingjohndeloreanfilm.com
Page 8 of 22 FirstFirst ... 6 7 8 9 10 18 ... LastLast
Results 71 to 80 of 220

Thread: Backlit Electronic Instrument Cluster

  1. #71
    Senior Member Bitsyncmaster's Avatar
    Join Date:  May 2011

    Location:  Leonardtown, MD

    Posts:    9,633

    My VIN:    03572

    Quote Originally Posted by robvanderveer View Post
    For proper 'old school' display, this would be way cool:

    Nixi tubes. Were the only option until 1970.
    Dave M vin 03572
    http://dm-eng.weebly.com/

  2. #72
    Let's see if you bastards can do 90. dvonk's Avatar
    Join Date:  May 2011

    Location:  Omaha, NE

    Posts:    1,755

    My VIN:    loading, please wait...

    nixie tubes are totally sweet... i don't think theyd match the interior though
    Obtain-O-Meter: 128%
    as of 2016/08/04
    0%|====|====|====|====|====50%====|====|====|====|====|100%

  3. #73
    Senior Member AdmiralSenn's Avatar
    Join Date:  May 2011

    Posts:    443

    Quote Originally Posted by dmc6960 View Post

    After this project is done (at least a year from now) I may consider building a replacement A/C decal in the unavailable most-desired style (Type 2 or 3 here), LED backlit, which will have the option to plug-in to the new cluster for matched dimming. Color options will be the same as the cluster.
    Just curious, would these black out with the key off? If so, consider one sold whenever you get around to it.
    Aka Adam S, aka Adam Wright
    1981 DMC-12 #3416, mothballed in preparation for motor swap
    2006 Volvo S60R

  4. #74
    Owner since 2007 Farrar's Avatar
    Join Date:  May 2011

    Location:  Fort Lauderdale

    Posts:    4,740

    My VIN:    02613

    Club(s):   (DCF)

    If I may ask a question out of ignorance: why did you decide to use multiple ICs instead of a PIC with multiple inputs and outputs like an Arduino? I ask only because I have seen a BMW gauge cluster driven by an Arduino and I think it had the same number of gauges as our cars. Thanks, and sorry if it's a dumb question!

    Farrar
    3.0L, automatic, carbureted

  5. #75
    Senior Member Bitsyncmaster's Avatar
    Join Date:  May 2011

    Location:  Leonardtown, MD

    Posts:    9,633

    My VIN:    03572

    Quote Originally Posted by Farrar View Post
    If I may ask a question out of ignorance: why did you decide to use multiple ICs instead of a PIC with multiple inputs and outputs like an Arduino? I ask only because I have seen a BMW gauge cluster driven by an Arduino and I think it had the same number of gauges as our cars. Thanks, and sorry if it's a dumb question!

    Farrar
    That's a good question. If you have dedicated simple routines than it's better to use many small micros. With large complicated software, you make a simple change in one routine and a bug creeps into something you never intended to change. It also makes circuit board layout much cleaner. These small micros cost from 50 cents to a few bucks. If you use interrupts then that can change the timing anytime you make a software change. We run into this problem at my day job. We share a 700 pin FPGA on a circuit board and when one user makes a change in that FPGA it messes up a lot of other logic timing.
    Dave M vin 03572
    http://dm-eng.weebly.com/

  6. #76
    Owner since 2007 Farrar's Avatar
    Join Date:  May 2011

    Location:  Fort Lauderdale

    Posts:    4,740

    My VIN:    02613

    Club(s):   (DCF)

    That makes perfect sense. Thanks, Dave!

    Farrar
    3.0L, automatic, carbureted

  7. #77
    EFI DeLorean dmc6960's Avatar
    Join Date:  May 2011

    Location:  Minnesota

    Posts:    1,591

    My VIN:    06960

    Quote Originally Posted by AdmiralSenn View Post
    Just curious, would these black out with the key off? If so, consider one sold whenever you get around to it.
    As of right now, no they will no black out. I need to keep consistent parts to try and keep this affordable for people. Too late to back out now anyways Adam, you already commited on one back at the beginning of the thread!

    I will ask if it's possible for a blackout face when getting the main decals printed. If its not horrible, I may let people choose it for an additional cost.
    Jim Reeve
    DMC6960

  8. #78
    EFI DeLorean dmc6960's Avatar
    Join Date:  May 2011

    Location:  Minnesota

    Posts:    1,591

    My VIN:    06960

    Quote Originally Posted by Farrar View Post
    If I may ask a question out of ignorance: why did you decide to use multiple ICs instead of a PIC with multiple inputs and outputs
    Dave pretty much answered it all. However these chips do have multiple in's and out's. While my software is still in its infancy, the side gauges will be sharing a single PIC with the software loop just going back and fourth updating the gauges. Really easy since none of them have consistent rapid updating like the tach and speedo will. The tach is going to need to interpret the odd-fire RPM signal and update the stepper position sometimes before it even reaches it so the needle doesn't stop-start or overrun the speed. The speedometer will need to keep several odometers in addition to rapid updates.
    Jim Reeve
    DMC6960

  9. #79
    Senior Member DMC5180's Avatar
    Join Date:  May 2011

    Location:  Reedsburg, WI

    Posts:    4,042

    My VIN:    5180

    Club(s):   (DMWC) (DCUK)

    So the gauges will be lit at all times when the key is on? Even with the visible graphics? Will the graphics be color matched or translucent clear/white for the various color options?
    DENNIS

    VIN 5180, Frame 3652, STAGE II​, EPS​, DM-eng Solid State Solutions (RPM Rly, Dm.Lt.Mod., Fan Fail Mod. , FAN Rly, HS.Rly) , HID headlights, SPAX user since 2009, Eibach springs, M Adj. Rear LCA's, DPNW poly-sway bar kit, DMCEU LCA Stabilizer link kit, DMCMW Illuminated door sills, Aussie Illuminated SS Shifter plate, REAL MOMO EVO Steering wheel, DELOREANA Extended View Side Mirrors w/ Heaters, DELOREANA LED Door Lights.

  10. #80
    EFI DeLorean dmc6960's Avatar
    Join Date:  May 2011

    Location:  Minnesota

    Posts:    1,591

    My VIN:    06960

    No they will not be lit at all times. Only with the parking/headlights. IF I made a blackout version I would need to modify the back lights to be on extra bright during the day.

    Only what is white right now will still be translucent white. Normal illumination color for those will be green. Other colors will be their normal tint and illuminate in those colors. See image in first post of this thread.

    Right now the other color options will only be able to do the white lettering (everything green in that first post photo). Once the first set of decals are made I'll play around will all the colors.

    Along with the PIC progamming I'm doing now, I'm also making the vector graphics for the decals. Doing much of this work myself should help keep costs down. I'll post visuals of them as I get them completed.
    Jim Reeve
    DMC6960

Page 8 of 22 FirstFirst ... 6 7 8 9 10 18 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •